Determining The Dxlink Transmitter Source Audio Port; Audio Format Support On Enova Dgx Boards - AMX Enova DGX 100 Series Hardware Reference Manual

Determining the DxLink Transmitter Source Audio Port

Active Video
HDMI
VGA/Analog
HDMI
VGA/Analog

Audio Format Support on Enova DGX Boards

The following table indicates which audio formats are supported by specific Enova DGX boards.
Audio Format Support on Enova DGX Boards
Audio Format
2 Channel L-PCM
6 Channel L-PCM
8 Channel L-PCM
Dolby Digital
DTS
Dolby TrueHD
DTS-HD Master
Dolby Atmos
* Dolby Digital and DTS support up to 48 kHz, 5.1 channels.
NOTE: In order to pass audio over the DVI Input boards their EDID need to be changed to an HDMI EDID which allow
Audio formats to be seen as supported by the source.
IMPORTANT: Signals routed through HDMI, 4K HDMI, 4K60 HDMI, DVI, DXLink Twisted Pair, and DXLink Fiber Boards normally
produce a quality image. If the installation has special scaling, EDID, or HDCP requirements, see page 199.
Enova Digital Media Switchers - Hardware Reference Manual
?AUDIN_FORMAT_AUTO
ENABLED
ENABLED
DISABLED
DISABLED
• • •
• • •
• • •
• • •
• • •
• •
• •
•
Source Audio Port
HDMI
Whichever port is set in ?AUDIN_FORMAT
Whichever port is set in ?AUDIN_FORMAT
Whichever port is set in ?AUDIN_FORMAT
• • • •
• • • •
• • • •
• • •* •*
• • •* •*
• • •
• • •
4K60 HDMI Input & Output Boards
• • •
94