Instagate Pro And Smartscale; Enova Dgx Hdmi Input Board - Specifications - AMX Enova DGX 100 Series Hardware Reference Manual

Digital media switchers, enclosures, input/output/expansion boards
Hide thumbs Also See for Enova DGX 100 Series:
Table of Contents

Advertisement

InstaGate Pro and SmartScale

HDMI Boards are HDCP 1.4 compatible and feature InstaGate Pro Technology for low-latency switching of HDCP

protected content and support computer video up to 1920x1200 and HDTV up to 1080p. The HDMI Boards also
support embedded audio, both linear PCM (stereo audio) and non-linear PCM (Dolby Digital, DTS, Dolby TrueHD,
etc.).
NOTE:
typically experienced when HDCP authenticates HDMI source and destination devices.) With InstaGate Pro Technology, when
a source requires HDCP encrypted content, the inputs and compliant downstream devices are automatically authenticated ?
it just works.
4K HDMI Boards are HDCP 1.4 compatible and feature InstaGate Pro Technology* for low-latency switching of

HDCP protected content and support progressive resolutions from 480p up to 4096x2160p@60Hz (Y/Cb/Cr 4:2:0).
4K HDMI Boards also support embedded audio, both linear PCM (stereo audio) and non-linear PCM (Dolby Digital,
DTS, Dolby TrueHD, etc.).
HDMI Boards meet HDCP Standards. For information on HDCP functionality for HDMI Boards, see "HDCP Support on

Enova DGX Switchers" on page 103.
HDMI Boards provide EDID emulation support with plug-and-play information provided by the Enova DGX

Switcher.
HDMI Output Boards feature SmartScale Technology which automatically responds to the preferred EDID

information and scales the video to the best resolution and video settings for that display without manual setup.

Enova DGX HDMI Input Board - Specifications

DGX HDMI Input Board - Specifications
GENERAL
Compatible AMX Products
Regulatory Compliance
HDMI w/HDCP
Compatible Formats
Signal Type Support
Video Data Rate (Max)
Video Pixel Clock (Max)
Progressive Resolution Support
Interlaced Resolution Support
4K Resolution Support (Max)
HDMI Cable Requirement
Input Equalization
Input Re-clocking (CDR)
Deep Color Support
HDR Support
Color Space Support
Enova Digital Media Switchers - Hardware Reference Manual
InstaGate Pro Technology eliminates HDCP latency and interruptions on all displays in a system. (These conditions are
Supported enclosures are Enova DGX 800, 1600, 3200 or 6400 Digital Media Enclosure built after June 1,
2016
See Enova DGX Digital Media Switcher Enclosure for regulatory compliance
DESCRIPTION
HDMI 1.X, HDMI 2.0, HDCP 1.X, HDCP 2.2, DVI
HDMI, DisplayPort++ (Input Only)
DVI-D (Single Link With HDMI Cable Adapter)
When used with compatible Enova DGX 100 series enclosures*: 18 Gbps (Max)
When used with compatible Enova DGX 100 series enclosures*: Up to 600 MHz
When used with compatible Enova DGX 100 series enclosures*: 480p up to 4096x2160 @ 60Hz, 4:4:4
480i, 576i, 1080i
NOTE: If input is interlaced, all scaled outputs will de-interlace video to a progressive resolution format. If
non-scaled output board or if scaler is in Bypass mode, interlaced input will pass through unaltered.
When used with compatible Enova DGX 100 series enclosures*:
• 3840x2160p @ 24/25/30/50/60 Hz, 4:4:4
• 4096x2160p @ 24/25/30/50/60 Hz, 4:4:4
• 3840x2160p @ 50/60 Hz, 4:2:0**
• 4096x2160p @ 50/60 Hz, 4:2:0**
** Supported by DX-RX-4K when in Bypass Scaling mode.
Premium Certified High Speed Cable Category 2, Recommended. HDMI High Speed Cable Category 2,
Required
Adaptive up to 21ft (7m). Cable distance support dependent on cable quality and signal format
Yes
24-bit, 30-bit***, 36-bit***
***30-bit and 36 bit are only supported in CTA-861 formats. When switched to an output board or RX with
Scaling support the Scaler must be in Bypass mode.
Yes HDR10
Output signal follows input format
Note: Requires the use of HDR compatible output board such as 4K60 HDMI Output Board
sRGB, BT.601, BT.709, BT.2020
RGB 4:4:4 , YCbCr 4:4:4, 4:2:2, and 4:2:0
• Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4 on scaled
output
• Output signal follows input format on non-scaled output boards
• If 4:2:0 is switched to a 4K RX the RX scaler must be set to bypass
HDMI Input & Output Boards
96

Advertisement

Table of Contents
loading

Table of Contents