Dxlink Fiber Input & Output Boards; Overview; Dxlink Fiber Boards, Duplex; Dxlink Fiber Boards, Simplex - AMX Enova DGX 100 Series Hardware Reference Manual

DXLink Fiber Input & Output Boards

Overview

This chapter pertains to DXLink Fiber Input and Output Boards (Duplex and Simplex).
FIG. 52
DXLink Fiber Boards, Simplex and Duplex (shown with dust plugs)

DXLink Fiber Boards, Duplex

Duplex DXLink Fiber Boards handle simultaneous, bidirectional or unidirectional data transfer:
Part #
FG1058-622
FG1058-632
FG1058-620
FG1058-630

DXLink Fiber Boards, Simplex

Simplex DXLink Fiber Boards only handle unidirectional data transfer. By removing the fiber return path, Simplex hardware
provides an added layer of security.
Part #
FG1058-623
FG1058-633
FG1058-621
FG1058-631
DXLink Fiber Boards, Duplex and Simplex have four input or output connectors per board.

DXLink Fiber Boards, Simplex are labeled "Simplex." DXLink Fiber Boards, Duplex are not labeled.

NOTE: When powered on, Duplex transceiver LEDs are yellow and green; Simplex transceiver LEDs are blue.
Enova DGX Enclosure Support for DXLink Fiber Input and Output Boards
DGX 800
DGX 1600
DGX 3200
DGX 6400
Enova Digital Media Switchers - Hardware Reference Manual
Model Name
Enova DGX DXLink Multimode Fiber Input Board, Duplex
Enova DGX DXLink Multimode Fiber Output Board, Duplex
Enova DGX DXLink Single Mode Fiber Input Board, Duplex
Enova DGX DXLink Single Mode Fiber Output Board, Duplex
Model Name
Enova DGX DXLink Multimode Fiber Input Board, Simplex
Enova DGX DXLink Multimode Fiber Output Board, Simplex
Enova DGX DXLink Single Mode Fiber Input Board, Simplex
Enova DGX DXLink Single Mode Fiber Output Board, Simplex
Enova DGX 800 enclosures can hold up to four DXLink Fiber Boards. Each enclosure holds a maximum of two input and two
output boards, accommodating connector configurations up to a maximum of 8x8, as well as three subsets (i.e., 4x4, 4x8, or
8x4).
Enova DGX 1600 enclosures can hold up to eight DXLink Fiber Boards. Each enclosure holds a maximum of four input and
four output boards, accommodating connector configurations up to a maximum of 16x16, as well as subsets (e.g., 16x8 or
4x12).
Enova DGX 3200 enclosures can hold up to sixteen DXLink Fiber Boards with four inputs or outputs per board. Each enclosure
holds a maximum of eight input and eight output boards, accommodating connector configurations up to a maximum of
32x32, as well as subsets (e.g., 12x24 or 32x8).
Enova DGX 6400 enclosures can hold up to thirty-two DXLink Fiber Boards. Each enclosure holds a maximum of sixteen input
and sixteen output boards, accommodating connector configurations up to a maximum of 64x64, as well as subsets (e.g.,
12x48 or 52x8).
DXLink Fiber Input & Output Boards
Model Number
DGX-I-DXF-MMD
DGX-O-DXF-MMD
DGX-I-DXF-SMD
DGX-O-DXF-SMD
Model Number
DGX-I-DXF-MMS
DGX-O-DXF-MMS
DGX-I-DXF-SMS
DGX-O-DXF-SMS,
134