Table of Contents
Advertisement
Menu Step
D6: "Cooked Be-
fore Ready"
Report
D7: "Stopped Too
Soon" Report
68
user error: cooking too much product in one load, cooking frozen product (in the
pressure fryer) when it should be fresh, or cooking before the Ready light
illuminates, etc.
•
An individual "XXXXX IS COOKING SLOWLY TODAY" report item is generated for
each product that has had more than 5% slow cook warnings today. This report item
is triggered based solely on the number of slow cooks for that product, whether
those slow cooks are due to voltage or heating problems, or due to cooking before
ready, cooking too much, or cooking frozen product. "D5: (Product Name)" "D5:
COOKING SLOW" "D5: TODAY". Press the down button.
•
If any of the slow cooks for this product are suspected as being due user error, a
second, "bad batch" report is generated for the product. "D5: (Product Name)" "D5:
COOKING SLOW" "D5: TODAY". Press the down button.
•
"D5: POSSIBLE" "D5: OVERSIZED" "D5: OR FROZEN" "D5: BATCH OF" "D5:
(Product Name)" "D5: DETECTED" "D5: 3 TIMES" "D5: TODAY". Press the down
button.
•
"D5: POSSIBLE" "D5: OVERSIZED" "D5: OR FROZEN" "D5: BATCH OF" "D5:
(Product Name)" "D5: DETECTED" "D5: 5 TIMES" "D5: TODAY".
This section shows how many cook cycles were started before the READY light was on.
This is strictly a user error. If the fryer was in the ready range when the user begins to
load product, but is out of the ready range by the time the cook cycle is started, the con-
trol will not give you an alarm. The D6: "Cooked Before Ready" Report contains the fol-
lowing information:
•
If the fryer wasn't ready before loading, an alarm sounds and "WAS NOT READY"
warning is generated. The number of times this has happened today is indicated by
the following report item: "D6: COOKED" "D6: BEFORE READY" "D6: 11 TIMES"
"D6: TODAY". Press the down button.
•
The number of "WAS NOT READY" warnings for this batch of oil is also reported.
Note that this value does not yet include the not ready warnings generated today.
"D6: BEFORE TODAY," "D6: COOKED" "D6: BEFORE READY" "D6: 8 TIMES" "D6:
ON THIS OIL". Press the down button.
•
Finally, the controller identifies how many times the not ready warning was
generated for the previous batch of oil: "D6: LAST OIL," "D6: COOKED" "D6:
BEFORE READY" "D6: 24 TIMES"
This section shows how many cook cycles were stopped early by the user, before the
cook timer had counted down to "0:00" and the "*DONE*" was displayed. This is a user
error. cook cycles that are canceled after cooking for less than 30 seconds are not
counted here. For example, if a cook cycle is accidentally started, and the cook cycle is
Description
Advertisement
Table of Contents
