Table of Contents
Advertisement
Menu Step
2 2 . . Press the program button to continue onto Input Info check.
11.
Input
Info
For controls and indicators information refer to
(INP A_VHDSF_
Indicators , page
M)
This mode displays the status of components and inputs. if the input signal is
detected, an identifying letter is displayed (see below). If the signal is not
detected, "_" is displayed.
1 1 . . With the power switch turned to on, and all inputs detected, "H_P_A_
• Max time to heat 270°F to 310°F.
• Lowest "peak rate' of all heat-ups.
• Maximum voltage.
• Minimum voltage.
• No. of "low voltage" warnings generated.
• Maximum amp draw.
• Minimum amp draw.
• Number of "low amps" warnings.
• Non-cooking time (hrs) while fryer was on.
• Total oil wear accumulated.
• Total number of cook cycles.
• Number of cook cycles started before ready.
• No. cook cycles quit early, 0:11 or more rem.
• No. cook cycles beeped *DONE* 0:21 or more after.
• Individual product cook counts.
• Individual product "not detected" counts.
• Individual product "slow cook" counts.
• Individual product "overloaded".
I I n n f f o o : During steps 10V through 10Y, press the product buttons (or Manual
program button) to see data on individual product items.
11.
VHDSF_M" shows in the display. See below for "definition" of codes.
• A= Power switch turned to on.
• V= Volts - 24 VAC detected.
Description
3.1 User Interface Controls &
51
Advertisement
Table of Contents
