Table of Contents
Advertisement
Menu Step
Display Name
SP-4
AUDIO VOLUME
SP-5
AUDIO TONE (HZ)
SP-6
AUDIO EFFECT
SP-7
MELT CYCLE
SELECT
I I n n f f o o : : Statistics, oil wear and the E-log will not be affected by this
initialization.
Press the up and down buttons to adjust the volume level of the
control between 1 and 10. 10 is the loudest setting.
Speaker frequency (50 - 2000 Hz, in 50 Hz steps) adjustable
by pressing the up and down buttons.
Sets the tone of the Pwr-up, Alarm, and End-of-Cycle beeps,
etc. The tone of each controller can be programmed to a
different value to allow each piece of equipment to be
identified by its own, unique sound. 1100Hz is default.
Audio effects setting (0 - 3):
0 = Normal (No effect)
1 = Fast Pulsed Beeps
2 = Slower Pulsed Beeps
3 = Warble (Freq. Shifting)
Allows an audio effect to be applied to Alarm and End-of-
Cycle beeps, to help distinguish one piece of equipment
from another.
Audio effects setting (0 - 3) adjustable by pressing the up
and down buttons:
0 = Normal (No effect)
1 = Fast Pulsed Beeps
2 = Slower Pulsed Beeps
3 = Warble (Freq. Shifting)
Allows an audio effect to be applied to Alarm and End-of-
Cycle beeps, to help distinguish one piece of equipment
from another.
Shortening/oil type setting (1. SOLID, 2. LIQ). Liquid is the
default setting for the CFE-415
The "1. SOLID" setting uses a very conservative melt cycle
for safely melting solid shortening.
Function
39
Advertisement
Table of Contents
