Table of Contents
Advertisement
Press product selection 1 and Filter Light flashes and display shows "OPEN DRAIN". Pull out
5 5 ) )
black drain knob to open drain and display shows "DRAINING".
Oil drains from vat into drain pan and then display shows "VAT EMPTY" "YES NO". Verify that
6 6 ) )
vat is empty, and press product selection 1.
Display shows "CLEAR OLD OIL FROM OIL LINES" "DISPOSE" "DONE". Press and hold the
7 7 ) )
left timer button for a few seconds to clear old oil. Once cleared, press the right timer button
and display shows "DONE".
Display shows "CLN VAT COMPLETE" "YES NO". Once vat is clean, press product selection
8 8 ) )
1.
Display will read "HOSE READY?" Ensure the hose is connected to fryer and aimed into
9 9 ) )
disposal shuttle.
W W A A R R N N I I N N G G ! !
Press and hold product selection 1 to dispose.
1 1 0 0 ) )
YES= Pump NO= Done.
1 1 1 1 ) )
Once oil is no longer pumping from drain pan, press the right product selection 3 button. Blue
1 1 2 2 ) )
Filter Light flashes and display shows "CLOSE DRAIN" and push in the black drain valve knob
to close drain.
Burn Risk! Always wear PPE (personal protective equipment) including heat
and oil resistance gloves, an apron and face shield to prevent burns caused by
hot surfaces and by splashing of hot oil.
25
Advertisement
Table of Contents
