Table of Contents
Advertisement
Menu Step
Display Name
SP-10
COOKING DISPLAY
SP-11
QUALITY TMR
SP-12
LONGER FILLTIME
ENABLED?
SP-13
LET USER EXIT
FILL?
SP-14
SKIP SKIM PROMPT
SP-15
2–STAGE WASH
ENABLED?
SP-16
DISPOSE REQUIRES
CODE?
SP-17
POLISH MM:SS
Press the down button to select what is displayed during the
cook cycle:
TIME = Count Down Timer
TM+ID= Timer and Product ID Alternate
NM+TM= Product Name and Timer Alternate
Press the down button to select what is displayed during if
the quality timer is enabled for products (not used on CFE-
415):
NONE=No Quality Timer Display
QT+ID= Quality Timer and Product ID Alternate
NM+QT= Product Name and Quality Timer Alternate
The default setting for this step is NO. Press the down button to se-
lect YES. If YES is selected, filtration will be extended if oil is not
detected during filling.
The default setting for this step is YES. Press the down button to
select NO. If YES is selected, filling can be cancelled during
filtration.
Press down button to change this setting from YES to NO. If YES
is selected, the skim prompt at the start of an Express Filter can be
bypassed by pressing the timer button.
The default setting for this step is NO. Press the down button to se-
lect YES. If YES is selected, The Express Filter will include a sec-
ond wash cycle.
Use the up and down buttons to change between YES and NO. If
YES is selected, the manager code is entered prior to disposing
oil.
Use the up and down buttons to set the polish duration during the
daily filter. The default setting for this is 5:00, but can be set be-
tween 0:00 and 15:00.
Function
41
Advertisement
Table of Contents
