How To Install A Type "B" Flex Plate - Genie S-65 XC Service And Repair Manual

Service and Repair Manual
Engines
How to Ins tall a T ype " B" Flex Plate
How to Install a Type "B" Flex
Plate
1 Install the flex plate onto the engine flywheel
with the rubber vibration isolators towards the
pump.
2 Apply Loctite® removable thread sealant to the
flex plate fasteners and loosely install the
fasteners.
3 Deutz models: Torque the flex plate mounting
bolts in sequence to 28 ft-lbs / 38 Nm. Then
torque the flex plate mounting bolts in
sequence to 40 ft-lbs / 54 Nm.
Ford and Perkins models: Torque the flex
plate mounting bolts in sequence to 14 ft-lbs /
19 Nm. Then torque the flex plate mounting
bolts in sequence to 20 ft-lbs / 27 Nm.
4 Apply a high viscosity coupling grease (Genie
part number 128025) to the splines of the
pump shaft and flex plate.
Grease Specification
Shell Alvania® Grease CG, NLGI 0/1 or equivalent.
68
® ™ ® ™
S -60 XC • S -65 XC
September 2018
Ford Models
Deutz Models
Perkins Models
Part No. 1288652GT