Control System Fault Codes; How To Retrieve Control System Fault Codes - Genie S-65 XC Service And Repair Manual

Service and Repair Manual

Control System Fault Codes

98
How to R etrieve Contr ol System F ault Codes
Control System
How to Retrieve Control System
Fault Codes
The machine control system contains two different
types of fault codes
Active Faults: These faults have been detected in
the current operating session. The presence of an
active fault will be reflected by the System Fault
Indicator lights and the alarm.
Logged Faults: The faults contained in the fault log
have occurred in the past and may or may not still
be in effect.
Both faults may be viewed by pressing the Fault
Button above the ground display and navigating to
either the Active Machine Faults screen or the
Machine Fault Log screen. The list of faults will by
shown by fault code and the hour meter of when it
occurred.
The fault lists can be browsed. To learn more about
a fault entry, select it and press OK. A screen will be
shown that describes the fault in more detail.
® ™ ® ™
S -60 XC • S -65 XC
September 2018
Part No. 1288652GT