Repair Procedures; Introduction - Genie S-65 XC Service And Repair Manual

Service and Repair Manual

Repair Procedures

Section 3 Repair Pr oc edures
Observe and Obey:
R
Repair procedures shall be completed by a
person trained and qualified on the repair of this
machine.
R
Immediately tag and remove from service a
damaged or malfunctioning machine.
R
Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:
R
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.
R
Be sure that all necessary tools and parts are
available and ready for use.
R
Use only Genie approved replacement parts.
R
Read each procedure completely and adhere
to the instructions. Attempting shortcuts may
produce hazardous conditions.
16
Machine Configuration:
R
Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
· Machine parked on a firm, level surface
· Key switch in the off position with the key
removed
· The red Emergency Stop button in the off
position at both the ground and platform
controls
· Wheels chocked
· All external AC power supply disconnected
from the machine
· Boom in the stowed position
· Turntable secured with the turntable rotation
lock
® ™ ® ™
S -60 XC • S -65 XC
September 2018
Part No. 1288652GT