Installing/Removing Simotion P320-4 Components; Preventive Maintenance; Replacing The Backup Battery - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Service and maintenance

10.3 Installing/removing SIMOTION P320-4 components

You can now use this image to reset the SIMOTION P320-4 to the factory settings. Note that
the changes made on the SIMOTION P320-4 will be lost in the process.
NOTICE
Retain data
Once the image has been loaded, the user may have to delete the retain data.
Procedure
Use the Restart (Del. SRAM) function from the SIMOTION P State application to reset.
Further information
Function elements (SIMOTION P State) (Page 69)
10.3 Installing/removing SIMOTION P320-4 components
10.3.1

Preventive maintenance

To maintain high system availability, we recommend the preventative exchange of those PC
components that are subject to wear. The table below indicates the intervals for this exchange.
Component
CMOS backup battery
10.3.2

Replacing the backup battery

Note
The service life of the backup battery is approximately 5 - 8 years, depending on the
environmental conditions.
118
Exchange interval:
4 years
Commissioning and Hardware Installation Manual, 01/2015
SIMOTION P320-4 E / P320-4 S