Restore The Factory Setting Using Simotion P State; Overall Reset Using Simotion P State - Operating Mode Switch Setting Mres - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Commissioning (software)
9.8 Data storage concept
9.8.5.2

Restore the factory setting using SIMOTION P State

The condition on delivery is restored via the menu item Extras > Reset to factory default.
Note
The SRAM and the PMEMORY.XML file will also be deleted.
The controller is restarted automatically.
Any licenses on the card will not be deleted.
Figure 9-12
Further information
on the SIMOTION P State - menus (Page 69)
9.8.5.3

Overall reset using SIMOTION P State - operating mode switch setting MRES

An overall reset deletes the non-volatile SIMOTION data or retain data.
Figure 9-13
108
Restoring factory settings
Overall reset
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015