Station Configurator - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Procedure
Proceed as follows to set local communication:
1. Call Set PG/PC Interface.
2. In the Access Path tab, set the field Interface Parameter Assignment Used to
PC internal (local).
3. Confirm with OK.
Note
To enable communication via PC internal, a link must be available to the Ethernet interface or
a LAN cable must be connected.
8.4.3

Station Configurator

The Station Configurator is required to configure the communication paths for the HMI
software.
The Station Configurator is provided directly as desktop icon of the SIMOTION P320-4.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
Parameter assignment/addressing
8.4 Local communication via PC internal
81