Maintenance And Service; Cleaning The Device Front; Removing And Installing Hardware Components; Repairs - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Maintenance and Service

12.1

Cleaning the Device Front

The device is designed for low-maintenance operation. You should still clean the device front
regularly, however.
Cleaning Agents
Use dish soap or foaming screen cleaner only as cleaning agents.
NOTICE
Risk of damage
Do not clean the device with aggressive solvents or scrubbing agents or with pressurized
air or steam cleaner.
Cleaning the Device Front
1. Switch off the device. This prevents the accidental triggering of functions when the screen
2. Dampen the cleaning cloth.
3. Spray the cleaning agent on the cloth and not directly on the device.
4. Clean the device with the cleaning cloth.
12.2

Removing and installing hardware components

12.2.1

Repairs

Performing repairs
Only qualified technical personnel are permitted to repair the device.
Danger to life
 Separate the device from the mains before opening it.
 Use the supplied screws to close the device before commissioning.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02
and/or the membrane keyboard is touched.
WARNING
12
99