Reset Simotion P320-4 To The Initial State - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Procedure
Proceed as follows to restore the delivery status of SIMOTION P320-4:
1. First, terminate SIMOTION P320-4 via the Terminate SIMOTION P button of the SIMOTION
P State application.
2. Then select Extras > Reset to factory default in the menu.
Figure 10-1
10.2.3

Reset SIMOTION P320-4 to the initial state

If an error occurred during parameter assignment, download, or when other settings were
configured or if you are not sure whether you have specified all the information correctly, it
may be useful or necessary to reset the SIMOTION P320-4 to its state prior to parameter
assignment.
Requirements
You have saved an image of the memory medium on a remote computer/remote medium.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
Restoring the delivery status
NOTICE
Note the consequences of user changes!
All data and settings for SIMOTION P320-4 changed by the user will be deleted!
The settings made using the Component Configurator will also be reset to the delivery
condition.
Service and maintenance
10.2 Restoring factory settings
117