Backing Up And Restoring Project Data (File Structure) - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Note
SIMOTION IT
You can find further information about SIMOTION IT in the following documentation:
● Diagnostics Manual: SIMOTION IT Diagnostics and Configuration
● SIMOTION IT programming manual Programming and Webservices
● SIMOTION IT programming manual Virtual Machine and Servlets
9.8.3.5

Backing up and restoring project data (file structure)

The project data (file structure) is located in the User data directory on the external CFast
card (drive D) of the SIMOTION P320-4.
1. To save the project data, copy the user data directory from the external CFast card, e.g. to
a storage medium of the SIMOTION P320-4 or to a USB flash drive.
2. To restore the project data, copy the user data directory, e.g. from a storage medium of the
SIMOTION P320-4 or a USB flash drive, to the external CFast card and replace the existing
directory.
This also enables series commissioning without a programming device or SIMOTION SCOUT.
Figure 9-6 Backing up and restoring a file system
Sequence of a series commissioning
Copy the User data directory from a storage medium to the external CFast card (Drive D) of
the SIMOTION P320-4 to be newly commissioned.
SIMOTION P320-4 must be in the terminated state for this.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
Commissioning (software)
9.8 Data storage concept
103