Vertical Mounting - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Mounting
4.5 Installing the SIMOTION P320-4 in the control cabinet
Mounting/installing the device
Examples of mounting types
Material
Concrete
Plasterboard
(min. 13 mm thick)
Metal
(min. 2 mm thick)
NOTICE
Observe the total weight of the SIMOTION P320-4
Ensure that the wall can hold four times the total weight of the device (including mounting rail
and additional expansion modules).
Removing the device from the mounting rails
● Push the device down until the bottom clamp releases the device.
● Swing the device away from the rails.
Additional references
Further information on standard rail and vertical mounting can be found in the
SIMOTION P320-4 E / P320-4 S Manual.
4.5.3

Vertical mounting

The optionally available vertical mounting front kit allows a space-saving installation.
Note
Vertical mounting front kit - SIMOTION P320-4
Only use the mounting kit that is specified for SIMOTION P320-4.
Mounting kits for previous versions cannot be used.
42
Bore diameter
8 mm diameter
60 mm depth
14 mm diameter
5 mm diameter
Fixing
Wall plug: 8 mm diameter
50 mm length
Screws: 4 mm diameter
50 mm length
Cavity fixings: 4 mm diameter
50 mm length
Metal screws M 4: 4 mm diameter
15 mm length
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015