Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual page 77

The IP address set here loses its validity when the following actions are carried out:
● Booting of the SIMOTION P320‑4
● Downloading a project to the SIMOTION P320‑4
● Stopping SIMOTION P Runtime (Terminate SIMOTION P)
● Restarting SIMOTION P Runtime (Restart)
The IP address in SIMOTION SCOUT can be changed permanently using the HW Config or
user program.
Changing the IP address
You change the IP settings after selecting the
Properties dialog opens.
Figure 8-3
Click Check Configuration to check the settings, etc., for agreement with the other interfaces.
You can find additional information about this in the section Ethernet communication
overview (Page 83).
Click Assign Configuration to also check the settings and accept them in any case.
Note
The IP data is only displayed when SIMOTION P320-4 is started.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
Onboard RT - Ethernet Properties
Parameter assignment/addressing
8.3 SIMOTION P control manager
button. The Onboard RT - Ethernet
77