Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual page 26

Description
2.2 SIMOTION P320-4 product description
Distributed I/O systems (PROFINET)
Table 2-1
Component
SIMATIC ET 200M
SIMATIC ET 200S
SIMATIC ET 200SP
SIMATIC ET 200MP
SIMATIC ET 200eco
SIMATIC ET 200pro
Note
Please note that not all modules of the above-mentioned I/Os or I/O systems are approved for
SIMOTION.
Moreover, system-related functional differences can occur when these I/O or I/O systems are
used on SIMOTION rather than SIMATIC.
For example, special process-control functions (e.g., HART modules, etc.) are not supported
by SIMOTION for the ET 200M distributed I/O system.
For a detailed and routinely updated list of I/O modules enabled with SIMOTION as well as
application information, visit us online at:
siemens.com - Industry Automation and Drive Technologies - Product Support -
Supplementary System Components
11886029)
Further modules are integrated via the GSD file of the device's manufacturer.
Note
Please note that in individual cases, additional general conditions must be fulfilled.
26
Components for distributed I/O
Function
Modular I/O system for control cabinet installation and high channel densities.
Finely modular I/O system for control cabinet installation including motor
starters, safety technology, and individual grouping of the load groups.
Finely scalable I/O system for cabinet installation; SIMATIC ET 200SP fea‐
tures a single-cable and multi-cable connection with push‑in terminals, com‐
pact dimensions, high performance, and low part variety.
Modular I/O system for cabinet installation and high channel densities in the
SIMATIC S7‑1500 packaging system.
SIMATIC ET 200MP permits the shortest bus cycle times and fastest re‐
sponse time even with large volumes of data.
I/O system with IP67 degree of protection for machine-related, cabinet-free
applications, featuring a flexible and fast connection system in ECOFAST or
M12.
Modular I/O system with IP65/67 degree of protection for machine-related,
cabinet-free applications, including motor starters.
(http://support.automation.siemens.com/WW/view/en/
Commissioning and Hardware Installation Manual, 01/2015
SIMOTION P320-4 E / P320-4 S