Power On And Software Installation; Power-Up; Additional Software For Hmi - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Power on and software installation

6.1

Power-up

SIMOTION P320-4 is supplied with pre-installed software modules. After activation, Windows
with SIMOTION P is powered up automatically.
The SIMOTION P320‑4 issues the following message after successful power-up:
Figure 6-1
The SIMOTION P320‑4 responds in this way to every subsequent power-up.
6.2

Additional software for HMI

If required, the following software can be installed directly on the SIMOTION P320-4:
● WinCC flexible
● OPC client from other manufacturers
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
SIMOTION P320-4 after power-up
6
63