Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual page 70

Operator Control (hardware)
7.1 SIMOTION P state application
SIMOTION P menu
SIMOTION P
Temperature
Set Diagnostic Switch
Webserver
Temperature specifications
Figure 7-4
The temperature specifications for SIMOTION P320-4 can be found under SIMOTION P >
Temperature.
The current, the minimum and the critical temperature are determined at the housing,
mainboard and CPU measuring points and displayed in this dialog box.
70
Description
Display of the temperatures in the device, monitoring of the threshold
value.
An alarm (Page 129) is issued when a threshold value is reached or
exceeded.
Diagnostics switch for recording diagnostic data.
Diagnostics data can be recorded during ramp-up and operation for
the error diagnostics. The diagnostics switch is automatically reset
after writing the data.
See also section Recording diagnostic data (Page 115).
Access to the SIMOTION IT Web server is protected by a multi-level
security concept.
Upon delivery, the security level is low to allow configuration of the
device.
The security status of the Web server can be set here.
The following selection options are available:
● Security Level: normal
● Security Level: low
Dialog Temperature
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015