Siemens SIMOTION P320-4 E Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Controller
  5. SIMOTION P320-4 E
  6. Manual
Siemens SIMOTION P320-4 E Manual

Siemens SIMOTION P320-4 E Manual

Hide thumbs Also See for SIMOTION P320-4 E:
Table of Contents

Advertisement

Quick Links

Download this manual
SIMOTION
SIMOTION P320-4 E / P320-4 S
Manual
Valid as of version V5.2
03/2018
A5E36004933B
Preface
Safety instructions
Industrial security
Description
Application planning
Interfaces
Installation/mounting
Connection
Troubleshooting/FAQs
Technical data
Dimension drawings
Spare parts
Standards and approvals
ESD Guideline
1
2
3
4
5
6
7
8
9
10
11
A
B

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMOTION P320-4 E

Summary of Contents for Siemens SIMOTION P320-4 E

  • Page 1 Preface Safety instructions Industrial security SIMOTION Description SIMOTION P320-4 E / P320-4 S Application planning Interfaces Manual Installation/mounting Connection Troubleshooting/FAQs Technical data Dimension drawings Spare parts Standards and approvals ESD Guideline Valid as of version V5.2 03/2018 A5E36004933B...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Preface

    ● SIMOTION P320-4 E / P320-4 S, Commissioning and Hardware Installation Manual, Edition 09/2016 Validity range This manual applies to the SIMOTION P320-4 E and SIMOTION P320-4 S devices as of product level SIMOTION V4.5. Standards The SIMOTION system was developed in accordance with ISO 9001 quality guidelines.

  • Page 4: Simotion P320

    ● SIMOTION Engineering System Handling ● SIMOTION System and Function Descriptions ● SIMOTION Service and Diagnostics ● SIMOTION IT ● SIMOTION Programming ● SIMOTION Programming - References ● SIMOTION C ● SIMOTION P SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 5 ● Using documentation online (find and search manuals/information) https://support.industry.siemens.com/cs/ww/en/view/109479653 My Documentation Manager Click the following link for information on how to compile documentation individually on the basis of Siemens content and how to adapt it for the purpose of your own machine documentation: https://support.industry.siemens.com/My/ww/en/documentation Training...
  • Page 6 If you have any further questions about disposal and recycling, please contact your local Siemens representative. Contact details can be found in our contacts database on the Internet http://www.automation.siemens.com/partner/index.asp SIMOTION P320-4 E / P320-4 S...

  • Page 7: Table Of Contents

    Description..............................49 System overview........................49 SIMOTION P320-4 product description.................51 3.2.1 SIMOTION P320-4 overview....................51 3.2.2 Features..........................52 3.2.3 SIMOTION P320-4 (hardware) structure................54 3.2.4 Interfaces and operating elements..................55 3.2.5 SIMOTION P Runtime (software) structure................55 3.2.6 Components...........................56 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 8 Permissible mounting positions....................104 6.2.1 Standard rail mounting and vertical mounting..............105 6.2.1.1 Standard rail mounting......................105 6.2.1.2 Vertical mounting.........................107 Installation notes........................109 Overview of operating modes for the SIMOTION P320-4............111 Decentralized structure......................112 Connection...............................113 Requirements........................113 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 9 Spare parts...............................153 11.1 Available spare parts for SIMOTION P320-4...............153 Standards and approvals..........................155 General rules........................155 ESD Guideline............................157 ESD definition........................157 Electrostatic charging of individuals..................158 Basic measures for protection against discharge of static electricity........159 Index.................................161 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 10 Table of contents SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 11: Safety Instructions

    Touching live components can result in death or severe injury. ● Only use power supplies that provide SELV (Safety Extra Low Voltage) or PELV (Protective Extra Low Voltage) output voltages for all connections and terminals of the electronics modules. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 12 ● Ensure that smoke can only escape via controlled and monitored paths. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 13 ● Perform a function test. ● Only put your plant into live operation once you have guaranteed that the functions relevant to safety are running correctly. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 14: Safety Instructions For Electromagnetic Fields (Emf)

    – Wearing ESD shoes or ESD grounding straps in ESD areas with conductive flooring ● Only place electronic components, modules or devices on conductive surfaces (table with ESD surface, conductive ESD foam, ESD packaging, ESD transport container). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 15: Security Information

    Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to cyber threats.

  • Page 16: Residual Risks Of Power Drive Systems

    For more information about the residual risks of the drive system components, see the relevant sections in the technical user documentation. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 17: Specific Safety Instructions For The Simotion P320-4

    Note that the device is classified as "Open Type" for use in the area of Industrial Control Equipment (UL508). Installation of the device in an enclosure according to UL508 is conditional for approval or operation according to UL508. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 18 When you touch electrostatic sensitive components, you can destroy them through voltages that are far below the human perception threshold. If you work with components that can be destroyed by electrostatic discharge, observe the ESD Guideline. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 19: Notes On Use

    ● Do not obstruct the venting slots of the device. Note Use in an industrial environment without additional protective measures This device was designed for use in a normal industrial environment according to IEC 60721-3-3. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 20 Safety instructions 1.2 Specific safety instructions for the SIMOTION P320-4 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 21: Industrial Security

    Unlocking Windows Note Windows locked Windows may be accidentally locked, e.g. through shortcut key Windows + L. If you do not know the password for the SIMOTION P320-4, please contact the Siemens Industry Online Support (https://support.industry.siemens.com/cs/?lc=en-DE). Windows firewall Note Windows firewall To allows the Windows IP to be accessed externally, this must be set as an exception in the Windows firewall File and Printer Sharing.
  • Page 22 Note the information on the user administration when working with SIMOTION IT. You will find information in the SIMOTION IT Diagnostics and Configuration Diagnostics Manual or the SIMOTION online help in Section User administration. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 23 ● Why is industrial security so important? (Page 24) ● General security measures (Page 26) ● Product-specific measures (virus scanners) (Page 33) You can view the entire document in the Industry Online Support (https:// support.industry.siemens.com/cs/ww/en/view/108862708). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 24: Why Is Industrial Security So Important

    Wireless LAN is also becoming increasingly available. ● Smart Grid Networking is not only limited to data networks, it also influences our energy infrastructure. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 25: Possible Corporate Security Holes

    ● Guidelines and regulations For this reason, a holistic approach is required to deal with the issue of security. Coordinated guidelines and regulations are required that cover all areas: Devices, systems, processes and employees. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 26: General Security Measures

    "Defense in Depth" strategy. The measures are structured according to the "onion" principle and each measure forms an additional protective layer around the core: the production plant. Figure 2-1 Defense in depth strategy SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 27: Plant Security

    ● Separate access control for production areas. ● Installation of critical components in securely lockable cabinets / switching rooms including monitoring and alarm signaling options ● Prohibited production areas with restricted access rights SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 28: Network Security

    DMZ network. Note The production networks should also be divided into separate automation cells in order to protect critical communication mechanisms. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 29 ● Virus scanners (Page 31) ● Reduction of attack points (Page 31) Network segmentation with SCALANCE S Siemens provides SCALANCE S security modules to meet network protection and network segmentation requirements. SCALANCE S security modules SCALANCE S security modules with Security Integrated provide: ●...
  • Page 30 Industrial security 2.3 General security measures SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 31: System Integrity

    In order to be used on industrial control components, a virus scanner should therefore meet the following requirements: SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 32: Patch Management

    WSUS automatically downloads update packages from the Internet (Microsoft Update) and offers them to the Windows clients for installation. The fully automatic update process ensures that Microsoft security updates are always available on Siemens clients. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 33: Product-Specific Measures

    More information on using a virus scanner on a SIMOTION P320-4 can be found in the FAQ "How can a virus scanner be used on a SIMOTION P320-4?" (https:// support.industry.siemens.com/cs/ww/en/view/59381507), which is available as a download from the Industry Online Support portal. SIMOTION P320-4 E / P320-4 S...

  • Page 34: Changing The Windows User Password

    Before the Windows password can be changed, it must be permitted for the user. If the following procedure is not observed, an error message is issued and the Windows password cannot be changed. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 35 Homepage: 2. The Users folder is displayed at Local Users and Groups in the Computer Management window. Click the Users folder. The available user groups are displayed. Figure 2-3 Computer management SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 36 This checkbox must be deactivated for the user to change the Windows password. Figure 2-4 SIMOTION properties Changing the Windows password You can find general information on the Windows password on the website at Microsoft - Changing des Windows-password (http://windows.microsoft.com/en-us/windows/change- windows-password#change-windows-password=windows-7). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 37 Windows password opens. First enter your current password and then the new Windows password. You must enter the new Windows password a second time for confirmation. Figure 2-6 Entering the new Windows password SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 38: Changing The Autologin

    See also Section Changing the Windows user password (Page 34). Automatically Log On SIMOTION P320-4 is preset so that the user does not have to enter the user name and the password to log on. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 39 Industrial security 2.4 Product-specific measures Preparation for changing the AutoLogin In order that an AutoLogin still functions after changing the Windows password, the password for the AutoLogin must be changed. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 40 Click the Users folder. The available user groups are displayed. Figure 2-10 Computer Management - Users 3. With the selection of Users> simotion, you can display the properties via Properties. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 41 Industrial security 2.4 Product-specific measures 4. Deactivate the User cannot change password checkbox in the simotion Properties dialog box. Figure 2-11 simotion Properties - General dialog box 5. Confirm with OK. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 42 To change the password for the AutoLogin, proceed as follows: 1. Open the search via Windows-Start and enter: netplwiz Figure 2-12 Programs netplwiz 2. The following User Accounts dialog box opens. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 43 Industrial security 2.4 Product-specific measures Figure 2-13 User Accounts SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 44 4. Enter your changed Windows user password in the Automatically Log On dialog box and confirm it by entering it a second time. Figure 2-15 Automatically Log On dialog box 5. Confirm the password with OK. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 45: Deactivating The Remote Desktop Connection

    If you do not use the headless mode and do not require a remote desktop connection, we recommend that you explicitly disable the remote desktop connection. NOTICE Deactivating the remote desktop connection To ensure that the remote desktop connection is not used, it must be explicitly deactivated. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 46 Procedure for deactivating the remote desktop connection 1. Using the Control Panel, select System > Remote settings. Figure 2-16 Remote settings 2. Select the Remote tab in the System Properties dialog box. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 47 Figure 2-17 System Properties dialog box 3. Select the Don't allow connections to this computer option at Remote Desktop. 4. Confirm with OK. Any remote desktop access is deactivated with this operation. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 48 Industrial security 2.4 Product-specific measures SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 49: Description

    PLC, motion control and technology functions on account of the increasing use of servo drives: ● Packaging machines ● Plastic and rubber processing machines ● Presses, wire-drawing machines ● Textile machines SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 50 Description 3.1 System overview ● Printing machines ● Machines for processing wood, glass, ceramics, and stone ● Production lines in the renewable energy sector, e.g. solar technology, wind power installations SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 51: Simotion P320-4 Product Description

    SIMOTION P320-4 overview The SIMOTION P320-4 provides high-level industrial performance. It features: ● Compact design ● Maintenance-free operation ● High degree of ruggedness ● Long-term availability Figure 3-1 SIMOTION P320-4 view SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 52: Features

    24 VDC (-20%/+20%) max. 4 A Operating conditions Operation without fan Drives and storage media CFast card or SSD Depending on the hardware version of the (Solid State Disk) SIMOTION P320-4 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 53 PROFINET I/O 3 × RJ45 (100 Mbps) Keyboard, mouse Can be connected via USB interface Software Operating systems P320-4 E Windows Embedded Standard 7 32-bit P320-4 S Windows 7 Ultimate 32-bit SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 54: Simotion P320-4 (Hardware) Structure

    The following figure shows the integration of the SIMOTION P320-4 with integrated PROFINET onboard and optional IsoPROFIBUS board in a target system. Human Machine Interface Programming device Engineering system Figure 3-3 SIMOTION P320-4 system overview SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 55: Interfaces And Operating Elements

    The user data can be stored on the data media of the SIMOTION P320‑4 . Siemens WinCC flexible software can be used to visualize operational sequences or to operate the machine. Third-party systems can be linked via the OPC interface.

  • Page 56: Components

    Windows 7 32-bit operating system and therefore cannot be installed. HMI software HMI/Runtime software can be operated on the same PC, e.g. the Siemens WinCC flexible software. Other software packages can be linked by means of the OPC interface. The HMI software is used as the general term in the following.
  • Page 57 For a detailed and routinely updated list of I/O modules enabled with SIMOTION as well as application information, visit us online at: SIEMENS Industry Online Support - Product support - Supplementary system components (https://support.industry.siemens.com/cs/de/en) Further modules are integrated via the GSD file of the device's manufacturer.
  • Page 58 The drivers for the UPS are not pre-installed on the PC. Install the current drivers that are supplied with the UPS. Note An IsoPROFIBUS board may be inserted in addition to the PROFINET onboard. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 59: Hmi And Simotion Scout

    SIMOTION P320-4 S. For this model, you must set the communication (access point) to TCP/IP . The SIMOTION P320-4 is already configured for this communication version at the time of delivery. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 60 Setting up the MAC bridge miniport See also Section Setting up a network bridge - MAC bridge miniport (Page 61) Note Only HMI-Runtime can be installed on the SIMOTION P320-4 E version. Figure 3-5 Model: Local HMI or ES SIMOTION P320-4 E / P320-4 S...

  • Page 61: Setting Up A Network Bridge - Mac Bridge Miniport

    ● Select Control Panel > All Control Panel Items > Network and Sharing Center > Change adapter settings. ● Open the Network and Internet > Network Connections dialog box. The network connections of your PC are shown here. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 62 Description 3.3 HMI and SIMOTION SCOUT Figure 3-7 Initial situation - Network connections Device Manager Open the Device Manager via the Control Panel: SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 63 Opening the Device Manager 2. Install the Microsoft Loopback Adapter via the Device Manager. 3. To do this, select the menu Action > Add legacy hardware. The Add Hardware Wizard then opens. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 64 Description 3.3 HMI and SIMOTION SCOUT Figure 3-9 Device Manager - Action menu Add Hardware Wizard Use the Add Hardware Wizard to install the network bridge. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 65 2. Select the option: Install the hardware that I manually select from a list (Advanced) and continue in the wizard with Next. Figure 3-11 Add Hardware - Manual selection from a list SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 66 Select Add Hardware - Network adapters 4. In the following dialog box, select the Microsoft Loopback Adapter. 5. To do this, select Microsoft at Manufacturer and the Microsoft Loopback Adapter at Network Adapter. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 67 Description 3.3 HMI and SIMOTION SCOUT 6. Continue in the wizard with Next. Figure 3-13 Add Hardware - Selecting the desired Network Adapter SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 68 Add Hardware - Selected Network Adapter can be installed 8. After finishing the installation, the following dialog box is displayed. Exit the wizard with Finish. Figure 3-15 Add Hardware - Installation of the Microsoft Loopback Adapter is finished SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 69 The Microsoft Loopback Adapter is displayed at Network adapters in the Device Manager. Figure 3-16 Device Manager - Microsoft loopback adapter Network connections The newly installed Microsoft Loopback Adapter is also displayed at Network Connections. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 70 To activate the network bridge, proceed as follows: 1. Select both adapters at Network Connections 2. Select Bridge Connections via the context menu. Figure 3-18 Network Connections - Setting the Bridge Connection SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 71 2. Deactivate the MAC Bridge Miniport DCP checkbox in the LLDP / DCP tab. If you do not deactivate the MAC Bridge Miniport DCP, the SIMOTION P320-4 may not be found via Accessible nodes. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 72: Hmi Or Es Via Profinet

    With PROFINET, devices can be linked up from the field level through to the management level. With PROFINET, an external HMI or ES can also be integrated into the network and data can be exchanged directly with the SIMOTION P320-4 device. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 73: Hmi Or Es Via Ethernet

    This makes it possible to access data or diagnostic information in the SIMOTION P320-4 from any location via intranet or the Internet. ● HTTP (browser, OPC XML) Setting in WebCFG.xml - default 80 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 74: Hmi Or Es Via Isoprofibus (Optional)

    Networking via PROFIBUS DP If you connect a central HMI via PROFIBUS DP, the X101 and X102 interfaces of the IsoPROFIBUS board are available. Figure 3-23 Model: Networking via PROFIBUS DP SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 75 Description 3.3 HMI and SIMOTION SCOUT References You can find further information on the HMI in the documentation: ● SIMOTION Runtime Basic Functions, section HMI (Human Machine Interface) coupling. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 76 Description 3.3 HMI and SIMOTION SCOUT SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 77: Application Planning

    Do not dispose of the original packaging. Pack the device for transport and storage in the original packaging. 5. Check the contents of the packaging and any accessories you may have ordered for completeness and damage. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 78 7. Please keep the enclosed documentation, it belongs to the device. You need the documentation when you commission the device for the first time. 8. Write down the identification data of the device. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 79: Identification Data Of The Device

    ● Serial number S VP<...> The computing unit is uniquely identifiable with the serial number at S VP <...>. <...> is an 8-digit character string. ● cULus Approval ● CE marking SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 80 Onboard MAC addresses for: ● ETHERNET (LAN) X1: VIPCTYSMAC1 ● PROFINET (LAN) X3: VIPCTYSPROFINET The data cited here is not real data. Figure 4-2 SIMOTION P320-4 S rating plate - MAC addresses SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 81 ● COA label of a device with Windows Embedded Standard 7 32-bit operating system Figure 4-3 ipc477d label coa 01 ● COA label of a device with Windows 7 operating system SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 82: Permissible Mounting Positions

    Application planning 4.3 Permissible mounting positions Permissible mounting positions Information on the permissible mounting positions for the SIMOTION P320-4 can be found in the section Installation/mounting > Permissible mounting positions (Page 104). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 83: Environmental Conditions

    ● Installations requiring special monitoring such as: – Elevator installations – Electrical plants in particularly hazardous areas An additional measure for using the SIMOTION P320-4 could be its installation in a cabinet. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 84 Application planning 4.4 Environmental conditions Ambient conditions For the mechanical and climatic environmental conditions, refer to the technical specifications in the section Ambient conditions (Page 136). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 85: Electromagnetic Compatibility

    Electromagnetic compatibility Definition Standards for electromagnetic compatibility (EMC) are fulfilled if the EMC Installation Guideline is complied with. See also: Further information is provided in the Appendix, Section General regulations (Page 155). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 86 Application planning 4.5 Electromagnetic compatibility SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 87: Interfaces

    The power supply must satisfy the requirements as described in section Connecting the power supply (24 VDC) (Page 121). This can be ensured by using the following devices, for example: ● SITOP smart 24 V / 10 A ● 24 VDC UPS (optional) SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 88 (hot swapping, etc.) are not supported by SIMOTION for the ET 200M distributed I/ O system. A detailed and routinely updated list of I/O modules released for SIMOTION as well as instructions on their use is provided on the Internet at Siemens Product Support (https:// support.industry.siemens.com/cs/ww/en/view/11886029).

  • Page 89: Overview Of Operator Control And Display Elements

    The following figure shows the arrangement of the indication and control elements of the SIMOTION P320-4. ① On/Off switch ② Operating displays (LEDs) Figure 5-1 SIMOTION P320-4 control and display elements SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 90: Control Elements

    To remove power from the device, the power supply plug must be removed. NOTICE Close down the operating system first First close down the operating system before switching off the device with the on/off switch, otherwise data may get lost. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 91: Status Displays

    Green SIMOTION P320-4 in RUN. Yellow SIMOTION P320-4 in STOP. Green/yellow: DCP flashing Flashes quickly (2 Hz) Yellow: Flashes FAULT state quickly (only in combination with L2 and L3) (5 Hz) SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 92 Flashes slowly Carry out the licensing to correct the error. (0.5 Hz) Further information on the licensing can be found in the SIMOTION P320-4 E / SIMOTION P320-4 S Commis‐ sioning and Hardware Installation Manual. Red: Flashes quick‐ FAULT state...

  • Page 93: Overview Of The Simotion P320-4 Interfaces

    Slot for CFast card CFast card (Page 100) 50-pin CF socket, types I/II V.24 COM1 Serial interface Serial interface COM1 (Page 101) IsoPROFIBUS board 2 x 9-pin socket IsoPROFIBUS board (optional) (optional) (Page 102) SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 94: Profinet Onboard

    Receive data Output 7, 8 SYMT- Internal 75 Ohm terminating resistor Shield LED 1 Lights up green: Link LED 2 Lights up yellow: Activity Optional product feature Autonegotiation and autocrossover are supported. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 95: Ethernet

    Lit: Active connection, e.g., to a hub – Flashing: Activity Note The interfaces available on the device have been numbered for unique identification. This numbering may deviate, however, from the numbering assigned by the operating system. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 96: Dvi-I

    TMDS clock shield Cable shield TMDS clock+ DVI clock channel Output TMDS clock- DVI clock channel Output Analog red (R) Analog red signal Output Analog green (G) Analog green sig‐ Output SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 97 5.8 DVI-I DVI-I interface (standard socket) Analog blue (B) Analog blue signal Output Analog horizontal sync Analog horizontal Output (HSYNC) sSync signal Analog ground (analog R, Analog ground G, & return) (GND) SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 98: Displayport

    DP data 3- Output CONFIG1 CAD Cable Adapter Detect Input CONFIG2 Ground (PullDown) AUX_CH+ Auxiliary channel+ Bidirectional Ground AUX_CH- Auxiliary channel- Bidirectional Hot Plug Detect Input Ground DP_PWR +3.3V (fused) Output SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 99: Usb 3.0

    Short designation Meaning Input/output VBUS + 5 V (fused) Output Data line Input/output Data line Input/output Ground – Data line Input Data line Input Ground – Data line Output Data line Output SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 100: Cfast Card

    Reserved Input/Output (not connected) PC11 Reserved Input/Output (not connected) PC12 Reserved Input/Output (not connected) PC13 Device Power (3.3V) PC14 Device Power (3.3V) PC15 Device GND PC16 Device GND PC17 Card Detect In SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 101: Com1

    Input/output Data carrier detect Input Receive data Input Transmit data Output Data terminal ready Output Ground Data set ready Input Request to send Output Clear to send Input Incoming call Input SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 102: Isoprofibus Board (Optional)

    RTS_AS AS request to send (O) Ground electrically isolated P5V_dp_fused +5 V / max. 90 mA (fused) electrically isolated Not connected LTG_A Data line (I/O) RTS_PG PG request to send (O) SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 103: Installation/Mounting

    The correct use of the device has to be verified with a function test on the system. This test can detect programming, configuration and wiring errors. The test results have to be documented and if necessary inserted into the relevant inputs. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 104: Permissible Mounting Positions

    The figure shows the interfaces on the front for representation purposes only. For rail mounting, the interfaces always point downward. You can find mounting information under Standard rail mounting (Page 105). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 105: Standard Rail Mounting And Vertical Mounting

    Ensure that the wall or ceiling can hold four times the total weight of the SIMOTION P320-4 including the standard mounting rail and additional expansion cards. See section Notes on installation (Page 109). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 106 ● 2 screws ● 1 T20 screwdriver Use the two screws to mount the standard mounting rail clip on the SIMOTION P320-4 enclosure. Figure 6-1 Mounting the standard mounting rail clip SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 107: Vertical Mounting

    3. Lift the device up and off. 6.2.1.2 Vertical mounting The fasteners and screws required are supplied with the device for the selected mounting option. Requirement ● 2 mounting brackets ● 4 screws ● 1 T20 screwdriver SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 108 Installation/mounting 6.2 Permissible mounting positions Procedure 1. Secure each mounting bracket with two screws. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 109: Installation Notes

    The device may not be securely fitted if you use dowels and screws other than those specified below for mounting. The device can fall and may be damaged. Use only the dowels and screws specified in the following table. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 110 Mounting positions The following mounting positions are permitted for the SIMOTION P320-4 and are described in detail in the following sections: ● Standard rail mounting (Page 105) ● Vertical mounting (Page 107) SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 111: Overview Of Operating Modes For The Simotion P320-4

    5. Mount the SIMOTION P320-4. Note The installation and removal of components as well as the mounting of the SIMOTION P320-4 are described in detail in the SIMOTION P320-4 E / P320-4 S Commissioning and Hardware Installation Manual. NOTICE Avoid loss of warranty If you install or exchange system expansions and damage your device, the warranty becomes void.

  • Page 112: Decentralized Structure

    USB or DVI connection. Please note the cable lengths that are supported for the panel. For the use of an HMI system, the SIMATIC IFP, for example, can be connected by means of the described interfaces. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 113: Connection

    The following section provides information on wiring and networking the complete SIMOTION system. Further information about the connection of the complete system and the individual components can be found in the SIMOTION P320-4 E / P320-4 S Commissioning and Hardware Installation Manual Open equipment These modules are open equipment.

  • Page 114: Overview Of Connections

    It does not matter in which order connection takes place. The connection of the individual components in the SIMOTION P320-4 E / P320-4 S Commissioning and Hardware Installation Manual. SIMOTION P320-4 E / P320-4 S...
  • Page 115 Connection 7.2 Overview of connections Figure 7-1 Hardware system overview - example with PROFINET onboard and optional IsoPROFIBUS board SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 116: Notes On Connecting

    ● Only connect I/O devices which are approved for industrial applications in accordance with EN 61000-6-2 and IEC 61000-6-2. ● I/O devices that are not hotplug-capable may only be connected after the device has been disconnected from the power supply. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 117 Regenerative feedback of voltage to ground by a connected or installed component can damage the device. Connected or built-in I/Os, for example, a USB drive, are not permitted to supply any voltage to the device. Regenerative feedback is generally not permitted. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 118: Protective Conductor Connection And Potential Equalization

    ● Take a faulty device out of service immediately and mark it accordingly. Requirement ● The device has been installed. ● 1 protective conductor, minimum cross section 2.5 mm ● 1 T20 screwdriver ● 1 x M4 cable lug SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 119 2. Screw the cable lug onto the protective conductor connection as shown. ① Protective conductor connection / potential equalization 3. Wire the protective conductor to the protective conductor connection of the control cabinet in which the device is installed. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 120: Connecting Peripheral Equipment

    The connected or built-in I/Os, such as USB drives, should not introduce a counter EMF into the device. Reverse voltages exceeding 0.5 V to ground that are generated by connected or installed components may prevent proper operation of the device or lead to its destruction. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 121: Connecting The Power Supply (24 Vdc)

    0.25 mm² to 2.5 mm². Only connect wires with a cross-section ≥ 0.5 mm². Solid or flexible cables can be used for the connection. Ferrules are not required. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 122 Procedure 1. Connect the cables as shown. Note the position of the terminal. 2. Insert the terminal at the marked po‐ sition. 3. Secure the terminal using the integra‐ ted screws. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 123: Connecting The Device To Networks

    The integrated Ethernet interface can be used for communication and for data exchange with automation devices such as SIMOTION SCOUT, SIMATIC S7. Further information Further information is available on the Internet at the Siemens Industry Mall (www.siemens.com/industrymall), the catalog and ordering system for automation and drives. SIMOTION P320-4 E / P320-4 S...

  • Page 124: Installing The Strain Relief

    Maximum cable tie width 3 mm. ● 1 cutting tool Procedure 1. Place the cable tie around the attachment plate of the strain-relief assembly and secure the plugged-in cables. 2. Cut off the cable tie overhang. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 125: Troubleshooting/Faqs

    If you use an adapter or extension on the mouse cable, also check the connectors. If the cursor still does not appear on the screen after you have performed these checks and measures, please contact your technical support team. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 126 UPS. Note the SIMOTION P320-4 E / P320-4 S Commissioning and Hardware Installation Manual > Power on and software installa‐ tion > Customer-specific software. The display in the BIOS for The correct MAC addresses can be taken from the rating plate the PROFINET MAC ad‐...

  • Page 127: Hotplug Enabled Bios Settings

    2. After completing the startup test, you can start the program setup with BIOS. The following message is shown on the display: Figure 8-1 SIEMENS Press Esc boot options Press Esc. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 128 Starting from a .EFI file Device configurator (Setup Configuration Utility) BIOS Update BIOS update from USB stick MEBx Start the Intel Management Engine BIOS Extension 5. Select the SCU device configurator. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 129 6. In the BIOS window, select the Advanced tab using the arrow keys and then select IDE Configuration. Press Enter to confirm the selection. Figure 8-3 Advanced > IDE configuration 7. In the IDE Configuration window, select SATA Port 2 HotPlug. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 130 Troubleshooting/FAQs 8.2 Hotplug Enabled BIOS settings 8. Change the Disabled selection shown here to Enabled. Figure 8-4 IDE Configuration > SATA Port 2 HotPlug SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 131 9. Press F10 Save and Exit. The new entries are accepted. 10.Confirm the subsequent prompt to save the settings and exit the BIOS setup with Yes. Figure 8-5 Confirming SATA Port 2 HotPlug > Enabled SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 132 Troubleshooting/FAQs 8.2 Hotplug Enabled BIOS settings SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 133: Technical Data

    ● Power requirement of the components (Page 140) ● Integrated DC voltage supply (Page 141) ● Technical specifications of the SITOP smart 24 V / 10 A (Page 142) ● Typical power consumption (Page 144) SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 134: General Technical Specifications

    1 V/m 2–2.7 GHz, 80% AM according to IEC 61000-4-3 10 V 10 kHz to 80 MHz, 80% AM according to IEC 61000-4-6 Immunity to magnetic fields 100 A/m, 50/60 Hz according to IEC 61000-4-8 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 135 Technical data 9.2 General technical specifications Motherboard Motherboard Processor ● Intel Core i3-3217UE 1.6 GHz, 3 MB SLC (SIMOTION P320-4 E) ● Intel Core i7-3517UE 1.7 GHz, 4 MB SLC (SIMOTION P320-4 S) Main memory 4 GB Buffer memory 512 KB MRAM...

  • Page 136: Ambient Conditions

    "Advanced CPU Control", of the BIOS Setup; otherwise you have to reduce the maximum ambient temperature by 5 °C. RAL = Restricted Access Location Installation of device in operating facilities with restricted access, for example, a locked control cabinet. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 137 - During storage/shipping 5 to 9 Hz: 3.5 mm 9 to 500 Hz: 9.8 m/s2 Resistance to shock Tested according to DIN IEC 60068-2-27 - During storage/shipping 250 m/s , 6 ms SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 138: Technical Data Of The Isoprofibus Board

    150 g Space requirements Short PCI slot Safety Safety Degree of protection IP20 in mounted state Protection class I complies with VDE 0106 Safety regulations EN 60950 Approvals CE, UL508, cULus SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 139 Quality assurance Quality assurance complies with ISO 9001. Note The safety regulations, approvals, protection type and protection class specified are valid only if the module is inserted in a SIMOTION P320-4. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 140: Power Requirements Of The Components

    The total power of the PCI and USB cards may not exceed 15 W Note Device can overheat! To avoid overheating, the power loss per PCI slot should not exceed 5 watts. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 141: Integrated Dc Power Supply

    The peak value of the startup current depends on the input voltage and the impedance of the 24 V power source. Peak currents greater than 6.5 A are possible. This will not have a negative impact on device functionality. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 142: Technical Data For The Sitop Smart 24 V/10 A

    Class I Primary/secondary galvanic isolation SELV output voltage according to EN 60950 and EN 50178; transformer according to EN 61558-2-17; overvoltage protection in the event of an internal error < 60 V SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 143 CSA C22.2 No 14, No 60950-1-03 Shipbuilding Germanischer Lloyd Directive 94/9/EC Declaration of conformity according to EN 60079‑15: ATEX94/9/EC Cat.3;Eex, nA, II, T4 U C‑Tick AS/NZS 2064:1997 Article numbers 6EP1334‑2AA01, 6EP1334‑2BA01 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 144: Typical Power Consumption

    120 mA USB expansion Max. 500 mA Max. 12 W PCI expansion Max. 500 mA Max. 12 W The total power of the PCI and USB expansion may not exceed 15 W SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 145: Dimension Drawings

    Overview of the dimensional drawings This section contains the dimension drawings for the SIMOTION P320-4: ● Standard rail mounting (Page 146) ● Vertical mounting (Page 148) ● SIMOTION P320-4 with an expansion card (Page 151) SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 146: Device Dimension Drawing For Standard Rail Mounting

    Various views of the standard rail mounting with dimensions are shown in the following: Figure 10-1 Standard rail mounting, bottom view Figure 10-2 Standard rail mounting, front view 83.7 92.2 Figure 10-3 Standard rail mounting, side left view SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 147 Dimension drawings 10.2 Device dimension drawing for standard rail mounting Figure 10-4 Standard rail mounting, rear view All dimensions in mm. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 148: Device Dimension Drawing For Vertical Mounting

    10.3 Device dimension drawing for vertical mounting 10.3 Device dimension drawing for vertical mounting Various views of the vertical mounting with dimensions are shown in the following: Figure 10-5 Vertical mounting, front view SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 149 Dimension drawings 10.3 Device dimension drawing for vertical mounting Figure 10-6 Vertical mounting, front side view SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 150 Dimension drawings 10.3 Device dimension drawing for vertical mounting Figure 10-7 Vertical mounting, rear side view Figure 10-8 Vertical mounting, view from above All dimensions in mm. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 151: Dimension Drawing Of Device With One Expansion Card

    10.4 Dimension drawing of device with one expansion card 10.4 Dimension drawing of device with one expansion card Device with one expansion card Figure 10-9 Standard rail mounting, bottom SIMOTION P320-4 - Side views SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 152 Dimension drawings 10.4 Dimension drawing of device with one expansion card SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 153: Spare Parts

    Spare parts 11.1 Available spare parts for SIMOTION P320-4 You can order the accessories via the Siemens Industry Mall (www.siemens.com/ industrymall). The following spare parts are available for SIMOTION P320-4: Spare parts for SIMOTION P320-4 Spare parts Article number Scope of delivery...
  • Page 154 Spare parts 11.1 Available spare parts for SIMOTION P320-4 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 155: Standards And Approvals

    Note that this device complies with limit class A with regard to the emission of radio frequency interference. This device can be used in all areas except residential areas. Declaration of conformity The current Declaration of conformity is available on the Internet at Declaration of conformity (http://support.automation.siemens.com/WW/view/en/10805446/134200). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 156 Standards and approvals A.1 General rules SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 157: Esd Guideline

    – Wearing ESD shoes or ESD grounding straps in ESD areas with conductive flooring ● Only place electronic components, modules or devices on conductive surfaces (table with ESD surface, conductive ESD foam, ESD packaging, ESD transport container). SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 158: Electrostatic Charging Of Individuals

    This figure indicates the maximum electrostatic charges that can accumulate on an operator when he comes into contact with the indicated materials. These values comply with the specifications in IEC 801-2. Figure B-1 Electrostatic voltage that can accumulate on operating personnel SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 159: Basic Measures For Protection Against Discharge Of Static Electricity

    If you have to take measurements on a module, make sure that you first discharge any static that may have accumulated in your body. To do this, touch a grounded metal object. Only use grounded measuring instruments. SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 160 ESD Guideline B.3 Basic measures for protection against discharge of static electricity SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

  • Page 161: Index

    Connecting I/Os SIMOTION P320-4, 119 Information, 120 Error correction SIMOTION P320-4, 117 SIMOTION P320-4, 125 Connecting the power supply ESD guideline, 157 SIMOTION P320-4, 122 ET 200, 57 cULus approval, 155 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 162 I/O systems, 57 SIMOTION P320-4, 135 Identification data Mounting SIMOTION P320-4, 79 SIMOTION P320-4, 111 Industrial Security SIMOTION P320-4 - decentralized structure, 112 Possible effects, Mounting positions Threats, 24 SIMOTION P320-4, 104 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 163 Checking, 77 SIMOTION P320-4, 17 Removing, 77 SCALANCE S, 29 Password Scope of delivery Change, 31 SIMOTION P320-4, 56 Security Database, 79 AutoLogin for SIMOTION P, 21 Physical production security, 27 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 164 CFast card, 153 Ambient conditions, 136 Climatic conditions, 136 SIMOTION P320-4, 104 Connecting the power supply, 122 Status indicators Decentralized structure, 112 SIMOTION P320-4, 91 Display elements and operator controls, 89 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 165 Info material, 88 Siemens Industry Mall, 87 Siemens Product Support, 88 USB 3.0 Interface, 99 User accounts, 31 Ventilation grid, 83 Vertical mounting Ambient conditions, 136 SIMOTION P320-4, 105 Virus scanner Requirements, 32 SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...
  • Page 166 Index SIMOTION P320-4 E / P320-4 S Manual, 03/2018, A5E36004933B...

This manual is also suitable for:

Simotion p320-4 sSimotion p320-4 e

Table of Contents