Isoprofibus Board And Profibus Dp; Connecting The Bus Connectors For The X101 And X102 Interfaces (Isoprofibus) - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Connection
5.5 Connecting PROFIBUS
5.5.4

IsoPROFIBUS board and PROFIBUS DP

PROFIBUS DP connection example
Both interfaces of the IsoPROFIBUS board can be used as PROFIBUS DP interfaces. The
following screen shows an example of a PROFIBUS application.
Figure 5-8
5.5.5

Connecting the bus connectors for the X101 and X102 interfaces (IsoPROFIBUS)

The bus connector is used to connect the PROFIBUS cable to the IsoPROFIBUS interface
(X101, X102). thus establishing a connection to additional stations.
56
Example for a PROFIBUS application
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015