Led Display - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Operator Control (hardware)
7.1 SIMOTION P state application
Figure 7-2
Note
The SIMOTION P State application is in English.
7.1.2

LED display

Meaning of LEDs
The meaning of the LEDs and their colors is described in the table below.
LED display Meaning
SF Red Error
RUN Green SIMOTION P320-4 in RUN
mode
STOPU Yellow SIMOTION P320-4 in STOP
user program mode
STOP Yellow SIMOTION P320-4 in STOP
mode
SF PN Red PROFINET bus error
SY/MT Yellow Sync of PROFINET interface
BUS1F Red Group error
BUS2F Red Group error
66
SIMOTION P State - PROFINET onboard and additionally with optional IsoPROFIBUS
board
Description
The error status of the SIMOTION P320-4 is displayed.
The user program is running.
The technology packages (e.g. synchronous operation, cam) are ac‐
tive. Test and commissioning functions can be executed without a
user program.
The user program is not active.
There is no user program running.
The technology packages are not active.
An error status is displayed on the PROFINET interface (X3).
It is displayed whether the PROFINET interface has been synchron‐
ized.
An error status is displayed on the IsoPROFIBUS interface (X101).
An error status is displayed on the IsoPROFIBUS interface (X102).
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015