Siemens SIMATIC RF650R Configuration Manual page 69

The "Network interfaces" tab
The "Network interfaces" tab contains the following area:
● Network ports
● SNMP
Figure 6-14
Network ports
In the "Network ports" area, you can enable/disable the network ports of the readers. Click
on the check box of the required network port to enable or disable it.
Note
Disabling the network ports
Make sure that you do not disable the port via which you are currently communicating with
the reader.
Note
Requirement for port statistics
Note that the "Port statistics" function requires one-port operation. Make sure that the
network port which is not in use is disabled with active port operating mode "With port
statistics".
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
The "Settings - Communication" menu item, "Network interfaces" tab
Configuring with the WBM
6.3 The menu items of the WBM
69