Siemens SIMATIC RF650R Configuration Manual page 196

XML interface
8.3 XML commands
Parameter
Parameter
value_id
value_
sourceName
value_tagID
value_tagPC
value_fieldName
value_password
value_success
value_utcTime
196
Type Values
Decimal value 0...4294967295
0...9
Text --
Hexadecimal --
value
0...9, A...F
Hexadecimal --
value
0...9, A...F
Hexadecimal --
value
0...9, A...F
Hexadecimal 00000000...
value FFFFFFFF
0...9, A...F
Fixed values True
False
Time --
Description
Unique command identifier
Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 46)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
Optional
EPC-ID in "RAW Hex Data Format".
This function applies to all transpond-
ers with this ID.
If this parameter is empty or not even
transferred, the function applies to all
transponders. Nevertheless only one
transponder is then permitted in the
antenna field.
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
Optional
Tag PC (Protocol Control)
16-bit value represented by four hexa-
decimal characters.
Example:
The value "1234" corresponds to the
binary value "0001.0010.0011.0100".
Name of tag field
Is specified using the WBM.
Optional
Access password for the transponder
This parameter does not need to be
defined if there is no password protec-
tion activated for the transponder.
Flag to indicate whether or not the
command was successful for this tran-
sponder.
True: Command successful
•
False: Command unsuccessful
•
Optional
UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03