Siemens SIMATIC RF650R Configuration Manual page 20

Commissioning
4.2 Connect the hardware
Pre-assembled cables therefore permit the ideal and simple connection of the reader. You
will find more information on the cables and wide-range power supply unit in the catalog "ID
10
(https://w3app.siemens.com/mcms/infocenter/content/en/Seiten/order_form.aspx?nodeKey=
key_9180440&infotype=1)".
Table 4- 1
Picture
For detailed information on mounting the readers as well as ordering data of the readers and
cables, refer to the section "SIMATIC RF600 System Manual
(https://support.industry.siemens.com/cs/ww/en/view/22437600)".
20
Interfaces and antenna connectors of the readers
Description
Interfaces of the RF680R/RF685R readers
①
Digital I/O interface (M12, 12-pin)
②
Power supply 24 VDC and RS-422 (M12, 8-
pin)
③
Ethernet interface, TCP/IP (M12, 4-pin)
④
Ethernet interface, TCP/IP (M12, 4-pin)
Interfaces of the RF650R reader
①
Digital I/O interface (M12, 12-pin)
②
Power supply 24 VDC and RS-422 (M12, 8-
pin)
③
Ethernet interface, TCP/IP (RJ-45 , 8-pin)
Antenna connectors of the RF650R/RF680R
readers
4 x antenna connectors for external antennas
(RP-TNC)
Antenna connector of the RF685R reader
1 x antenna connector for external antenna
(RP-TNC)
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03