Getblacklist - Siemens SIMATIC RF650R Configuration Manual

XML interface
8.3 XML commands
Parameter
Parameter
value_id
value_
sourceName
value_ blackList-
Cmd
value_tagID
8.3.3.2

getBlackList

With this command, all EPC-IDs currently stored in the black list are queried.
The black list is a filter mechanism with which transponders can be filtered out.
Transponders whose IDs are stored in the black list are ignored and not processed.
Command
<frame>
<cmd>
</cmd>
</frame>
170
Type
Decimal value
0...9
Text
Fixed values
Hexadecimal
value
0...9, A...F
<id> value_id </id>
<getBlacklist>
<sourceName> value_sourceName </sourceName>
</getBlacklist>
Values Description
0...4294967295 Unique command identifier
-- Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 46)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
Add How "setBlacklist" works:
Add_obs
Add: all the following EPC-IDs will
•
be saved
Del
Del_all
Add_obs: all EPC-IDs with the
•
"observed" status are stored in the
black list.
Del: all the following EPC-IDs will
•
be removed from the black list
Del_all: All entries in the black list
•
will be removed.
-- EPC-ID in "RAW Hex Data Format"
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
Configuration Manual, 10/2015, C79000-G8976-C386-03
SIMATIC RF650R/RF680R/RF685R