Getallsources - Siemens SIMATIC RF650R Configuration Manual

XML interface
8.3 XML commands
8.3.3.3

getAllSources

With this command, the names of all configured read points of the reader are queried.
Command
<frame>
<cmd>
</cmd>
</frame>
Reply
<frame>
<reply>
</reply>
</frame>
// opt → Optional: Line can be omitted.
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 211)".
Parameter
Parameter
value_id
value_
sourceName
172
<id> value_id </id>
<getAllSources/>
<id> value_id </id>
<resultCode> 0 </resultCode>
<getAllSources>
<returnValue>
<sourceName> value_sourceName </sourceName>
<sourceName> value_sourceName </sourceName>
...
</antenna>
</returnValue>
</getAllSources>
Type
Decimal value
0...9
Text
Values Description
0...4294967295 Unique command identifier
-- Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 46)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
Configuration Manual, 10/2015, C79000-G8976-C386-03
// opt
SIMATIC RF650R/RF680R/RF685R