Siemens SIMATIC RF650R Configuration Manual page 223

Parameter
Parameter
value_id
value_
errorNumber
value_utcTime
value_errorText
Value_eventType
value_paramXY
List of possible alarm messages
Error number
hex
0x14EF
0x1512
0x1513
0x1514
0x1515
0x1521
0x1522
0x1523
0x1525
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
Type
Decimal value
0...9
Decimal value 0 -
9
Text
Text
Text
Text
Description
dec
5359 ERROR_NO_ANSWER_FROM_TAG
The transponder is not responding.
5394 ERROR_WRONG_PASSWORD
The password you entered is incorrect. Access to the transponder was denied.
5395 ERROR_VERIFY_TAG_FAILED
Verification of the transponder failed.
5396 ERROR_TAG_UNSPECIFIED
General transponder error.
5397 ERROR_TAG_INSUFFICIENT_POWER
There is not enough transponder power.
5409 ERROR_NO_TAG
There is no transponder in the antenna field.
5410 ERROR_NO_DATA
The requested data is not available.
5411 ERROR_INVALID_CRC
Bad checksum
5413 ERROR_NO_FREQUENCY
No radio channel activated.
Values Description
0...4294967295 Unique command identifier
0...65535 Error number
You will find a list of error numbers in
the following table.
-- UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e. g.: 2009-12-24T18:34:56.929+00:00.
-- Message text of the alarm
Coming Status display
Going
Some alarms have a simple status
indication. This indicates whether the
error occurred and is still present or
whether it has been eliminated.
-- Additional parameter
The name of the parameter depends
on the error. Depending on the error
number, an alarm contains a different
number of parameters.
XML interface
8.4 XML EventReports
223