Siemens SIMATIC RF650R Configuration Manual page 183

Parameter
value_tagID
value_newID
value_idLength
value_password
value_utcTime
value_
antennaName
value_rSSI
value_channel
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
Type Values
Hexadecimal --
value
0...9, A...F
Hexadecimal --
value
0...9, A...F
Decimal value 16, 32, 48...496
0...9
Hexadecimal 00000000....
value FFFFFFFF
0...9, A...F
Time --
Fixed values Antenna01
Antenna02
Antenna03
Antenna04
Decimal value 0...255
0...9
Decimal value 1...50
0...9
XML interface
8.3 XML commands
Description
Optional
EPC-ID in "RAW Hex Data Format".
This function applies to all transpond-
ers with this ID.
If this parameter is empty or not even
transferred, the function applies to all
transponders. Nevertheless only one
transponder is then permitted in the
antenna field.
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
New EPC-ID in "RAW Hex Data For-
mat" to be written to the transponder.
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
Optional
Length of the new EPC-ID in bits.
If this parameter is set, the reader
checks the correct length of "val-
ue_newID". If the check fails, a nega-
tive reply is sent.
Without this parameter, the new EPC-
ID is only checked if the length is a
multiple of 16 bits.
Optional
Access password for the transponder
This parameter does not need to be
defined if there is no password protec-
tion activated for the transponder.
Optional
UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Optional
Name of the antenna
Optional
RSSI value
Optional
Channel number on which the tran-
sponder was detected.
183