Siemens SIMATIC RF650R Configuration Manual page 61

Filters
The "Filters" area contains a list of all created filters. To edit a filter profile, select the
required filter in the list. The selected filter is highlighted in color. Click the "Insert" button to
create a new filter. Click the "Delete" button to delete an existing selected filter.
Filter properties
In the "Filter properties" area, you can adapt the properties of the individual filters. To allow
filter functions to take effect, the information defined in the filter must be read out from the
transponders and compared with the filter criteria.
Table 6- 13
Property
Name
Bank
Start address
Length
Criterion
ASCII
Mask
Initialize data
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
Description of the filter properties
Description
Input box for assigning a logical name/ descriptive title to the filter.
Drop-down list for selecting the memory bank in which the memory area
is located.
Address starting at which the filter will be checked.
Value range
Number of bytes to be checked starting at the start address. The value
specified here affects the length of the input boxes "Mask" and "Value".
Value range
Specifies which value the checked positions must contain HEX repre-
sentation).
Possible characters
Hiding/unhiding the ASCII view.
When the ASCII view is active, the values of the criterion are shown
additionally in ASCII notation. You can edit the values both in the HEX
format or in the ASCII format.
You can choose between the two input modes "Overwrite" and "Insert".
Showing/hiding the mask.
Specifies which positions of the criterion should be checked.
Example: 00FF → Bits 0 ... 8 of the criterion will be checked.
Possible characters
Show/hide the view for initializing the data.
Using the initialization function, you can preset the boxes of the criterion
and the mask.
Configuring with the WBM
6.3 The menu items of the WBM
0 ... 65535 bytes
1 ... 1024 bytes
0 ... 9, A ... F
0 ... 9, A ... F
61