Conference - Connecting A Party To A Call Using Refer-Back; Speaking With Only One Specific Conference Party; Interconnecting Conference Partners; Ending A Conference - Avaya T3 IP Compact User Manual

Establishing several connections

Conference - connecting a party to a call using refer-back

During a call (e.g. with 06975058):
Press the "Refer-back" function key. The opposite party is put on hold.
... Enter the call number of the second conference party. You can set up the conference
once you are connected to this subscriber.
Scroll to the Conference with 06975058 menu item.
Confirm entry.
• The third subscriber whom you are calling does not answer: press the "Esc" key to
switch back to the first party.
• You can also assign a "Conference" function key. Detailed information on setting up
function keys can be found in the section entitled
↑
keys [ 58].
• It is not possible to have a conference between a call waiting (second call) and the first
party.

Speaking with only one specific conference party

You want, for example, to remove the conference party with call number 06975058 from the
conference in order to be able to speak with the other conference party on his own:
Scroll to the out of conference 06975058 menu item.
Confirm entry. You can now speak alone with the desired subscriber. If you want to speak
with both parties again, select the Conference with 06975058 menu item.

Interconnecting conference partners

During the conference:
Scroll to the Transfer to ... menu item.
Confirm entry.
• You can also connect the two conference parties with each another by replacing the
receiver.

Ending a conference

During the conference:
Press "ESC". There is now no longer a connection between the conference parties.
Making calls as usual
Assigning functions / phone numbers to
33