Kyocera 13600 Adjustment Manual page 84

2. Details of Menu Items in Adjustment Settings for Skilled Operators
[Folding Unit Tray Full Detection]
0707: [Number of Sheets Folded after Full Detection]
Specify the number of sheets the machine prints when it detects that the folding unit tray is full before
displaying a warning message.
By increasing the number of sheets printed, you can decrease warning messages, prevent the machine
from stopping printing, and so increase throughput.
A multi-sheet fold copy is counted as a single sheet.
This setting becomes effective only if 0706: [Folding Unit Tray Full Detection] is set to [On].
• If the display of the warning message is delayed, the paper delivered to the folding unit tray may
not be stacked properly or the delivered paper may block the paper exit and cause subsequent
paper to be misfed.
Setting Items
[No. of Sheets Folded after Full
Detection]
0708: [Adjust Z-fold Position 1]
Adjust the width of the bottom end segment (S) of Z-folded sheets when using the multi-folding unit.
Press [+] to increase (S) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the
the trailing edge.
82
Setting Items
Default
Value
0
Values
[On]
[Off]
Max. Min.
Value Value
250 0
Default Value
[On]
Step Unit
1 sheet(s)
mark indicates