Kyocera 13600 Adjustment Manual page 38

2. Details of Menu Items in Adjustment Settings for Skilled Operators
• Increasing the toner adhesion might reduce fusibility, causing toner splatter or distorted text and
thin lines.
Setting Items
[Black]
0205: [Adjust Line Width]
Adjust the intensity of the laser for transferring image data to the drum.
If you increase the laser intensity, the line width is increased. By adjusting the laser intensity, you can
adjust the line width.
After specifying this setting, execute 0202: [Adjust Image Density].
Press [+] or [−] to adjust the laser intensity.
• Adjusting this setting may cause distorted text and blurred lines. Check the printed images while
making the adjustment.
Setting Items
[Black]
0206: [Adjust Density Difference Across Feed Direction]
Adjust the image density difference between the top and bottom of the image.
To make the adjusted settings take effect, turn the main power off and then back on.
Press [+] to increase the density at the bottom (and decrease it at the top) and press [−] to decrease the
density at the bottom (and increase it at the top).
• Depending on the machine's other settings, this setting may have no effect.
Setting Items
[Black]
36
Default Max.
Value Value
0 5
Default Max.
Value Value
0 5
Default Max.
Value Value
0 10
Min.
Step
Value
-5 1
Min.
Step
Value
-5 1
Min.
Step
Value
-10 1
Unit
None
Unit
None
Unit
None