Kyocera 13600 Adjustment Manual page 74

2. Details of Menu Items in Adjustment Settings for Skilled Operators
0618: [Correct Punch Skew]
Adjust the amount of skew correction for punching when using Finisher SR5050 or Booklet Finisher
SR5060.
Use this to reduce punching skew due to differing size, thickness, or paper curl.
If the sheets become skewed as a result of punching, press [+] to increase the degree of skew correction.
Setting Items
[A4 ]
[B5 JIS ]
[A5 ]
[A5 ]
1
[8 / × 11 ]
2
1 1
[5 / × 8 / ]
2 2
1 1
[5 / × 8 / ]
2 2
[Other Paper Sizes]
0619: [Paper Alignment in Shift Tray Setting]
Specify the accuracy of printed paper alignment when applying shift-sorting with the Finisher SR5050 or
Booklet Finisher SR5060.
Use this if the tops of the sheets stacked by shift-sorting are misaligned.
If [Speed Priority (Normal)] is selected, the shifting speed is reduced by approximately half to reduce the
misalignment at the top due to inertia when the tray is moved. If [Accuracy Priority] is selected, the
throughput may decrease. To give higher priority to throughput, select [Speed Priority (Normal)].
[Paper Alignment in Shift Tray Setting]
0620: [Number of Sheet Align for Stapling]
Specify the number of sheets the staple unit aligns at a time for stapling.
72
Default
Value
0.0
Setting Items
Max. Min.
Value Value
1.0 -1.0
Values
[Speed Priority
(Normal)]
[Accuracy Priority]
Step Unit
0.5 mm
Default Value
[Speed Priority
(Normal)]