Kyocera 13600 Adjustment Manual page 45

• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in 02: [Adjust Wide LCT Fan Level] in "Advanced Settings" takes
precedence.
Setting Items
[Tray 4]
[Tray 5]
[Tray 6]
0307: [Adjust Wide LCT Fan Timer]
Adjust the duration of the airflow of the three-tray wide LCT (LCIT RT5080) for fanning the sheets.
The Wide LCT fans sheets by blowing air between the sheets before feeding them.
By increasing the duration of the airflow, you can reduce multiple feeding and paper jams when printing
on coated or thick paper.
Press [+] to increase the duration of the airflow or [−] to decrease it.
• Increasing the duration of the airflow may reduce throughput.
Setting Items
[Tray 4]
[Tray 5]
[Tray 6]
0308: [Pickup Assist Setting]
Specify the paper feed roller movement when using three-tray wide LCT (LCIT RT5080), LCT (LCIT
RT5070), and multi bypass tray.
If the paper feed roller fails to pick up slippery paper such as coated paper, and misfeeding of paper
occurs, set this to [On].
Default Max.
Value Value
70 100
Default Max.
Value Value
3 10
Setting Values
Min.
Step
Value
10 10
Min.
Step
Value
1 1 second(s)
Unit
%
Unit
43