Kyocera 13600 Adjustment Manual page 65

0606: [Adjust Punch Position Across Feed Direction]
Adjust the vertical position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060.
Press [+] to move punch holes forward (up), or [−] to move them backward (down).
2 Holes Left
Paper feed direction
Setting Items
[2 Holes Type JP / EU]
[3 Holes Type US]
[4 Holes Type EU]
[4 Holes Type NE]
[2 Holes Type US]
0607: [Adjust Punch Position With Feed Direction]
Adjust the horizontal position of the punch holes when using Finisher SR5050 or Booklet Finisher
SR5060.
Press [+] to move the punch holes away from the sheet's trailing edge or [−] to move them toward the
edge.
2 Holes Top 2 Holes Right
Paper feed direction
Default
Value Value
0.0
CZC217
Max. Min.
Value
2.0 -2.0
Setting Values
Step Unit
0.5 mm
63