Kyocera 13600 Adjustment Manual page 24

2. Details of Menu Items in Adjustment Settings for Skilled Operators
[Machine: Maintenance]
For details about the following items, see page 47 "[Machine: Maintenance]".
No.
0502 [Execute Photoconductor
Refreshing]
0503 [Unscrew/Screw-on Cap
to Replace Toner Bottle]
0504 [Developer Fill]
0505 [Developer Fill: Result]
0506 [Developer Exhaust]
0507 [Developer Exhaust: Result]
0509 [Developer Setup: Result]
0512 [ITB Manual Lubrication]
0515 [Reset Replaceable Parts
Counter]
0516 [Estimated Life Already
Used]
0517 [Temperature / Humidity
inside the Machine]
0518 [Temperature / Humidity
outside the Machine]
0520 [Back Up / Restore Custom
Paper Data]
0521 [Counter Settings for Fusing
Unit Replacement]
0522 [Execute Charger
Cleaning]
[Finishing: Finisher]
For details about the following items, see page 54 "[Finishing: Finisher]".
22
Item
Remove dust on the drum surface.
Screw on or unscrew the toner bottle cap.
Fill the developer unit with fresh developer.
Display the result of filling developer.
Discharge used developer into the developer bottle.
Display the result of discharging developer.
Display the result of developer setup.
Lubricate the intermediate transfer belt.
Counter Reset the counter for replaceable parts.
Display the duty cycle counters of replaceable parts.
Display the internal temperature and humidity.
Display the external temperature and humidity.
Back up and restore custom paper profiles.
This setting can be used with multiple fuser units.
Up to four fuser units can be recorded.
Displays the counter of each part of the fuser unit.
Clean the charge unit.
Description