Kyocera 13600 Adjustment Manual page 35

By specifying this setting, you can correct image misalignment, expansion, and shrinkage due to non-
uniform paper feeding.
In [Adjust Image Position of Side 1 With Feed Dir], adjust the position of the image on side 1 parallel to
the paper feed direction. Press [+] to shift the image to the left (leading edge) or [−] to shift it to the right
(trailing edge).
In [Adjust Image Position of Side 2 With Feed Dir], adjust the position of the image on side 2 parallel to
the paper feed direction. Press [+] to shift the image to the right (leading edge) or [−] to shift it to the left
(trailing edge).
In [Adjust Magnification With Feed Direction], adjust the horizontal image scaling on sides 1 and 2.
Press [+] to reduce the scaling and [−] to increase it.
Setting Items
[Adjust Image Position of Side 1
With Feed Dir]
[Adjust Image Position of Side 2
With Feed Dir]
[Adjust Magnification With Feed
Direction]
0108: [ADF Double Feed Detection]
This function is available for 11100 and 13600.
Specify whether or not to detect multiple feeding of originals loaded in the Auto Document Feeder
(ADF).
If [On] is selected, the machine stops printing and displays a message reporting a paper jam when it
detects multiple feeding. The machine may erroneously detect double feeding when you use creased,
scratched or torn originals, originals with holes, perforated originals, or originals with sticky notes or
tape affixed. In such a case, select [Off] to prevent erroneous detection.
Setting Items
[Double Feed Detection]
Default Max.
Value Value
0.0 5.0
Values
[On]
[Off]
Setting Values
Min.
Step
Value
-5.0 0.1
Default Value
[On]
Unit
mm
%
33