Kyocera 13600 Adjustment Manual page 107

Fuser Adjustment
For details about the following items, see page 124 "Fuser Adjustment".
No.
44 [Put Pressure before
Fusing]
45 [Startng Time of Ptng Presr
before Fusing]
46 [Fusing Heat Roller
Temperature Adj]
47 [Fusing Pressure Roller
Temperature Adj]
48 [Fusing Nip Width Setting]
49 [Paper Feed Interval
Setting]
50 [Reduce Initial CPM: Low
Temp. Envrnmt.]
51 [Reduce Initl CPM:
Norml/High Temp Env]
52 [Adjust Cleaning Web
Motor Interval]
53 [Adjust Adding Fusing
Temperature 1]
54 [Adjust Adding Fusing
Temperature 2]
Decurler Adjustment
For details about the following items, see page 129 "Decurler Adjustment".
Item
Specify whether or not to have the fusing pressure roller
come into contact with the fusing belt before the printing
operation (paper feeding) starts.
Adjust the timing for the fusing pressure roller to come into
contact with the fusing belt before the printing operation
(paper feeding) starts.
Adjust the heat roller temperature.
Adjust the pressure roller temperature.
Adjust the nip width between the fusing belt and pressure
roller.
Adjust the interval between the feeding of each sheet.
Select one of the three levels of initial print speed
reduction at low temperatures.
Select one of the three levels of initial print speed
reduction at normal room temperatures and above.
Specify the interval between each activation of the
cleaning web.
Adjust the temperature applied to the fusing unit at the
start of paper transfer.
Adjust the temperature applied to the fusing unit
immediately before the start of paper transfer.
Menu Items and Functions
Description
105