Kyocera 13600 Adjustment Manual page 133

Setting Items
[Adjust Z-fold Position 2]
60: [Half Fold Position: Single-sheet Fold]
Adjust the fold position (S) of half folded sheets when using the multi-folding unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (S) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the
the trailing edge.
Paper feed direction
Setting Items
[Adjust Half Fold Position: Single-sheet
Fold]
61: [Letter Fold-out Posn 1: Single-sheet Fld]
Adjust the fold position for the bottom segment (S2) of letter fold-out sheets when using the multi-folding
unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (S2) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the
the trailing edge.
Max. Value
4.0
L1
S
CEZ002
Max. Value
4.0
Min. Value Step
-4.0 0.2
mark indicates
Min. Value Step
-4.0 0.2
mark indicates
Setting Values
Unit
mm
Unit
mm
131