Kyocera 13600 Adjustment Manual page 138

4. Details of Menu Items in Advanced Settings
68: [Adjust Gate Fold Position 2]
Adjust the fold width of the bottom segment 2 (S2) of gate folded sheets when using the multi-folding
unit.
Press [+] to increase (S2) and [−] to reduce it.
The upper right illustration shows a partly opened, gate folded sheet, and the lower right illustration
shows a fully folded sheet.
The mark indicates the leading edge (relative to the paper feed direction), and the
the trailing edge.
Setting Items
[Adjust Gate Fold Position 2]
• You cannot specify this setting when using 12" × 18"
69: [Adjust Gate Fold Position 3]
Adjust the fold position of the bottom segment 3 (S3) of gate folded sheets when using the multi-folding
unit.
Press [+] to increase (S3) and [−] to reduce it.
The upper right illustration shows a partly opened, gate folded sheet, and the lower right illustration
shows a fully folded sheet.
The mark indicates the leading edge (relative to the paper feed direction), and the
the trailing edge.
136
S2
L3
L3
Paper feed direction
CEZ009
Max. Value Min. Value
4.0 -4.0
paper.
mark indicates
Step Unit
0.2 mm
mark indicates