Kyocera 13600 Adjustment Manual page 46

2. Details of Menu Items in Adjustment Settings for Skilled Operators
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in 03: [Pickup Assist Setting] in "Advanced Settings" takes precedence.
[Tray 4: Wide LCT]
[Tray 5: Wide LCT]
[Tray 6: Wide LCT]
[Tray 4: LCT]
[Tray 5: LCT]
[Tray 6: LCT]
[Tray 7]
0309: [Adjust Paper Separation Time]
To prevent multi-feeding, adjust the paper separation time when feeding paper. To prevent multi-
feeding, adjust the paper separation time for feeding paper when using three-tray wide LCT (LCIT
RT5080), LCT (LCIT RT5070), and multi bypass tray.
Adjust this parameter if multi-feeding problems occur frequently.
Press [+] to increase the paper separation time or [−] to decrease.
• Be aware, however, that increasing the paper separation time increases the reverse roller-paper
contact time, leading to a higher risk of paper scratching.
• Also, note that optimum printing speed might not be possible if the paper separation time is
increased.
44
Setting Items Values
[Auto Select]
[On]
[Off]
Default Value
[Auto Select]