Kyocera 13600 Adjustment Manual page 33

0104: [Adjust Registration Paper Buckle (Thick Paper)]
Adjust the degree of paper arching at the registration gate when using paper of Paper Weight 5 to 8.
By adjusting the degree of paper arching for relatively stiff thick paper, you can prevent image
misalignment and paper skew.
For paper of Paper Weight 1 to 4, specify 0103: [Adjust Registration Paper Buckle].
Press [+] or [−] to adjust the degree of paper arching.
Setting Items
[Paper Weight 5]
[Paper Weight 6]
[Paper Weight 7]
[Paper Weight 8]
0105: [Deactivate Image Position Adjustment Across Feed Dir]
Specify whether or not the machine automatically detects paper pathway deviations during the paper
feeding process and adjusts the vertical position of the print image accordingly.
Printing will stop when the vertical position has deviated exceeding the adjustable range (3 mm/0.1
inch). Specify [Deactivate Only Jam Detection] to continue printing.
This function relies on a sensor that receives light reflected from the paper's surface. Because of this, it
may not work with dark paper, transparent film, or printed paper that has no margins. If this function
does not work with the paper you have loaded, disable this function by selecting [Deactivate].
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in 12: [Deactivate Image Position Adjustment] in "Advanced Settings"
takes precedence.
Default Max.
Value Value
0 5
Setting Values
Min.
Step
Value
-5 1
Unit
mm
31