Kyocera 13600 Adjustment Manual page 77

Setting Items
[Output Fan Setting]
0625: [Adjust Output Fan Level]
Adjust the airflow of the shift tray for fanning the sheets when using Finisher SR5050 or Booklet Finisher
SR5060.
If sheets to the shift tray are stuck to each other when this setting is at its default value, increase the fan
capacity.
Setting Items
[Adjust Output Fan Level]
0626: [Maximum No. Stacked Sheets in Output Tray]
Specify the amount of paper stacked in Finisher SR5050 or Booklet Finisher SR5060.
Specify the amount of paper that can be stacked in the shift tray to avoid jamming (depends on the
paper size) .
Setting Items
[Small Size (Paper Length: Less than 216.0)]
[Medium Size (Paper Length: 216.1 - 432.0)]
[Large Size (Paper Length: More than 432.1)]
Selection
[Auto]
[On]
[Off]
Selection
[Auto]
[Increase Air Volume]
Selection
[Default]
[1500 Sheets]
[1000 Sheets]
[Default]
[1000 Sheets]
[500 Sheets]
[Default]
[500 Sheets]
Setting Values
Default Value
[Auto]
Default Value
[Auto]
Default Value
[Default]
75