Genie GTH-2506 AU.3 Operator's Manual page 24

March 2018
Controls
19 Cab heater fan switch
Push the bottom of the switch to turn the cab
heater fan on: first position for low speed and
second position for high speed. Push the top of
the switch to turn the cab heater fan off.
20 Auxiliary hydraulic circuit switch (if equipped)
Push the button to switch the hydraulic directional
flow between the two auxiliary lines.
21 Mixing bucket switch (if equipped)
Push the bottom of the rocker switch to enable
the hydraulic mixing bucket functioning. Push
the top of the switch to stop the hydraulic mixing
bucket functioning.
22 Hazard warning lights switch (if equipped)
Push the bottom of the switch to turn the hazard
warning lights on. Push the top of the switch to
turn the hazard warning lights off.
23. Road lights switch
Push the rocker switch to turn the road lights
on: first position for position lights and second
position for low beams.
24. Hydraulic mixing bucket oil direction switch (if
equipped)
Press the switch to regulate the oil flow direction
towards right or left: push the top to direct the
oil towards left; push the bottom to direct the oil
towards right.
25. Hydraulic quick attach enabling switch (if
equipped)
Push and hold the switch to enable the coupling
or the release of the attachment, managed by
the control handle.
22
26 Road/Job-site switch
Push the bottom of the rocker switch to select
job-site mode. Push the bottom of the rocker
switch to select road transfer mode.
27 Transmission control lever - Horn button
Move the transmission control lever away from
you for forward gear. Move the lever toward you
for reverse gear. Move the lever to the center
position for neutral.
Press the top end lever button and the horn will
sound. Release the button and the horn will stop.
28 Windshield washer reservoir
GTH-2506 AU.3
Second Edition - Second Printing
Part No. 57.0009.0730