Genie GTH-2506 AU.3 Operator's Manual page 45

Second Edition - Second Printing
Although the LMS warns the operator when
they are reaching the rated capacity, it does
not replace the operator's experience in the
safe use of the telehandler. It is the operator's
responsability to operate the telehandler in a safe
manner and to control risks associated with the
operation of the telehandler. The operator must be
able to recognise these events (e.g. by examining
the alarms and warnings screen, checking
the operation against the load chart) and take
appropriate action to avoid the hazards (i.e. stop
all load movements that would further de-stabilize
the machine and bring the machine to a stable
condition).
Before operating this telehandler, the operator
must become familiar with the safe operation of
the machine and LMS.
Display unit
The display screen is also known as a human
machine interface (HMI). The LMS uses the HMI
to receive inputs from the operator (i.e. attachment
selection) and presents key information back
to the operator. The display can also be used
to troubleshoot machine faults associated with
LMS (i.e. boom operation, joystick, outrigger and
chassis tilting functionality).
Part No. 57.0009.0730
There are two main screens used to display
information about the condition of the machine
during normal operation.
Function buttons (1, 2).
of these buttons depends on the screen being
displayed. In the home screen, function buttons
on the left hand side (1) are used to zoom in and
out of the load chart area; the bottom four buttons
on the right hand side of the screen are used
for audible alarm ON/OFF, front camera view
(if equipped), rear camera view, and access to
secondary home screen. On all other screens, the
function buttons perform actions as indicated on
the screen.
Encoder button (3).
main menu, and selections within sub-menus
rotate clockwise or counter clockwise to scroll
through menu options and to enter access code
numbers in the login screen.
Main menu button (4).
access the main menu, press again in menu
screen to scroll through available menu items.
Home button (5).
to the home screen from the main menu or a
submenu.
Escape button (6).
to the previous menu or to exit from a menu item.
Figure 2 Display unit input buttons
GTH-2506 AU.3
Operating Instructions
Press to access the
Press this button to return
Press this button to return
March 2018
Functionality
Press button to
43