Genie GTH-2506 AU.3 Operator's Manual page 14

March 2018
Work Area Safety
Component Damage Hazards
Do not use any battery or charger greater than 12V
to jump-start the engine.
Do not use the machine as a ground for welding.
Do not steer the front tires on dry pavement when
the axle differential lock is activated.
Crush Hazards
Keep clear of moving parts during machine operation.
Set the parking brake, put the transmission in neutral
and lower the carriage or the attachment to the ground
before leaving the machine.
Keep clear of elevated components.
Support components before performing service. Keep
clear of moving parts during machine operation.
Burn Hazards
Allow hot surfaces to cool before
touching or servicing.
12
Explosion and Fire Hazards
Do not start the engine if you smell or detect liquid
petroleum gas (LPG), gasoline, diesel fuel or other
explosive substances.
Do not refuel the machine with the engine running.
Do not operate the machine in hazardous locations
or locations where potentially flammable or explosive
gases or particles may be present.
Do not spray ether into engines equipped with glow
plugs or air intake grid heaters.
Do not use air or oxygen for charging the accumulators.
GTH-2506 AU.3
Second Edition - Second Printing
Refuel the machine and charge the
battery only in an open, well-
ventilated area away from sparks,
flames and lighted tobacco.
Part No. 57.0009.0730